Pass rate, every year
996 tests across 4 model years, 2019–2022.
+11.6 pts vs the national average
Pass rate, every year
996 tests across 4 model years, 2019–2022.
+11.6 pts vs the national average
Best year to buy
2020 93.2%
The strongest of the 4 years on record. See the 2020 page →
Worst year to buy
2021 90.8%
2.4 points below the 2020 peak. See the 2021 page →
The Audi SQ2 MOT pass rate is 92.6%, +11.6 percentage points above the UK average. That is 996 DVSA MOT tests recorded between 2019 and 2022. This page lists the most common Audi SQ2 MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
MOT pass rates are national — type your postcode to see how Audi SQ2 MOT pass rates does in your corner of the country.
The Audi SQ2 passed on its first attempt in 92.1%, and its overall record sits +11.6 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the Audi SQ2 in the 2023–2025 data: 996 tests across 4 model years (2019–2022). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 996 |
| Overall pass rate | 92.6% |
| Passed on first attempt | 92.1% |
| Average mileage at test | 27,489 mi |
| Model years covered | 2019–2022 (4 years) |
| Versus UK national average | +11.6 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the Audi SQ2, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Tyres | 48% |
| Visibility | 23% |
| Brakes | 20% |
| Noise, emissions and leaks | 4% |
| Lamps, reflectors and electrical equipment | 4% |
| Seat belts and supplementary restraint systems | 1% |
Shares are over the Audi SQ2's recorded defect strings, merged across its year pages.
Around 48% of the recorded Audi SQ2 failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Has a cut in excess of the requirements deep enough to reach the ply or cords" (2.2%), "Has ply or cords exposed" (1.2%), "Tread depth below requirements of 1.6mm" (0.7%) among the Audi SQ2's tyres faults.
Around 23% of the recorded Audi SQ2 failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Windscreen damaged but not adversely affecting driver's view" (1.5%), "Wipers blade defective" (0.5%), "Wipers does not clear the windscreen effectively" (0.1%) among the Audi SQ2's visibility faults.
Around 20% of the recorded Audi SQ2 failures fall in the Brakes section of the MOT inspection manual. Testers recorded "Brake pads less than 1.5 mm thick" (1.6%), "Brake pads worn down to wear indicator" (0.1%), "Flexible brake hoses excessively twisted" (0.1%) among the Audi SQ2's brakes faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the Audi SQ2, each with how many of the model's 996 tests it was noted on.
The strongest Audi SQ2 model year on record is 2020 (93.2% across 590 tests), and the weakest is 2021 (90.8%). The gap between them is 2.4 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this Audi SQ2's own most-recorded failure strings, starting with what a tester is most likely to flag on a Audi SQ2.
the brakes — “brake pads less than 1.5 mm thick”
Look through the spokes of each wheel at the pad — less than 3mm of friction material, or a lip on the disc edge, is the usual failure. Check the handbrake holds on a slope with a few clicks, not at the top of its travel.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
Derived from the DVSA failure strings testers recorded for the Audi SQ2. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
92.6% of the 996 recorded Audi SQ2 MOT tests ended in a pass, +11.6 percentage points above the national average. 92.1% of those passed on the first attempt.
2020 is the strongest Audi SQ2 year on record at 93.2%, while 2021 is the weakest at 90.8%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded Audi SQ2 failures are "Has a cut in excess of the requirements deep enough to reach the ply or cords" and "Brake pads less than 1.5 mm thick" — together around 4% of tests, mostly in the Tyres section.