Cupra Born V3 MOT Pass Rate & Official DVSA Failure Statistics

Cupra Born V3 MOT History and Failure Rates vs UK National Average

The Cupra Born V3 passed on its first attempt in 87.5%, and its overall record sits +7.8 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the Cupra Born V3 in the 2023–2025 data: 925 tests across 1 model years (2022–2022). A test still carries exactly one pass or fail verdict.

Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.

Most Common Cupra Born V3 MOT Problems by Failure Category

Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the Cupra Born V3, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.

Shares are over the Cupra Born V3's recorded defect strings, merged across its year pages.

Top Recorded Cupra Born V3 DVSA MOT Test Statistics & Defect Descriptions

The descriptions below are the exact DVSA failure strings testers recorded most often for the Cupra Born V3, each with how many of the model's 925 tests it was noted on.

• "Has ply or cords exposed" (Major) — noted on about 55 Cupra Born V3 tests, 6.0% of the model's MOT record.
• "Has a cut in excess of the requirements deep enough to reach the ply or cords" (Major) — noted on about 26 Cupra Born V3 tests, 2.8% of the model's MOT record.
• "Has a bulge, caused by separation or partial failure of its structure" (Major) — noted on about 14 Cupra Born V3 tests, 1.5% of the model's MOT record.
• "Windscreen damaged but not adversely affecting driver's view" (Minor) — noted on about 12 Cupra Born V3 tests, 1.3% of the model's MOT record.
• "Headlamp aim too high" (Rectified) — noted on about 5 Cupra Born V3 tests, 0.5% of the model's MOT record.
• "Tread depth below requirements of 1.6mm" (Major) — noted on about 5 Cupra Born V3 tests, 0.5% of the model's MOT record.

Best and Worst Cupra Born V3 Model Years by Pass Rate

The strongest Cupra Born V3 model year on record is 2022 (88.8% across 925 tests), and the weakest is 2022 (88.8%). Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.

Newest model year first. Only years with at least 50 recorded tests are listed.

Pre-MOT Inspection Checklist for Cupra Born V3 Owners

These checks follow this Cupra Born V3's own most-recorded failure strings, starting with what a tester is most likely to flag on a Cupra Born V3.

• the windscreen — “windscreen damaged”

  Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.

• the lights — “headlamp aim too high”

  Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.

• the tyre tread — “tread depth below requirements of 1.6mm”

  Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.

Derived from the DVSA failure strings testers recorded for the Cupra Born V3. A check that finds nothing means the item is likely fine, not that the test is guaranteed.

Frequently Asked Questions: Cupra Born V3 MOT & Reliability