Pass rate, every year
371 tests across 2 model years, 2021–2022.
+7.7 pts vs the national average
Pass rate, every year
371 tests across 2 model years, 2021–2022.
+7.7 pts vs the national average
Best year to buy
2022 91.1%
The strongest of the 2 years on record. See the 2022 page →
Worst year to buy
2021 86.5%
4.6 points below the 2022 peak. See the 2021 page →
The Cupra Leon VZ1 MOT pass rate is 88.7%, +7.7 percentage points above the UK average. That is 371 DVSA MOT tests recorded between 2021 and 2022. This page lists the most common Cupra Leon VZ1 MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
MOT pass rates are national — type your postcode to see how Cupra Leon VZ1 MOT pass rates does in your corner of the country.
The Cupra Leon VZ1 passed on its first attempt in 87.4%, and its overall record sits +7.7 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the Cupra Leon VZ1 in the 2023–2025 data: 371 tests across 2 model years (2021–2022). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 371 |
| Overall pass rate | 88.7% |
| Passed on first attempt | 87.4% |
| Average mileage at test | 27,593 mi |
| Model years covered | 2021–2022 (2 years) |
| Versus UK national average | +7.7 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the Cupra Leon VZ1, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Tyres | 64% |
| Visibility | 23% |
| Brakes | 8% |
| Seat belts and supplementary restraint systems | 3% |
| Lamps, reflectors and electrical equipment | 2% |
Shares are over the Cupra Leon VZ1's recorded defect strings, merged across its year pages.
Around 64% of the recorded Cupra Leon VZ1 failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Has a cut in excess of the requirements deep enough to reach the ply or cords" (3.2%), "Has ply or cords exposed" (3.0%), "Tread depth below requirements of 1.6mm" (2.7%) among the Cupra Leon VZ1's tyres faults.
Around 23% of the recorded Cupra Leon VZ1 failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Windscreen damaged but not adversely affecting driver's view" (1.9%), "Wipers blade defective" (1.1%), "Mirrors slightly damaged" (0.5%) among the Cupra Leon VZ1's visibility faults.
Around 8% of the recorded Cupra Leon VZ1 failures fall in the Brakes section of the MOT inspection manual. Testers recorded "Brake pads less than 1.5 mm thick" (0.8%), "Brake pads worn down to wear indicator" (0.5%) among the Cupra Leon VZ1's brakes faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the Cupra Leon VZ1, each with how many of the model's 371 tests it was noted on.
The strongest Cupra Leon VZ1 model year on record is 2022 (91.1% across 179 tests), and the weakest is 2021 (86.5%). The gap between them is 4.6 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
| Year | Tests | Pass rate |
|---|---|---|
| 2022 Leon VZ1 | 179 | 91.1% |
| 2021 Leon VZ1 | 192 | 86.5% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this Cupra Leon VZ1's own most-recorded failure strings, starting with what a tester is most likely to flag on a Cupra Leon VZ1.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
the wipers and washers — “wipers blade defective”
Run the wipers with the screen wet: they should clear it in one sweep without smearing or juddering. Top the washer bottle up and check both jets hit the screen.
Derived from the DVSA failure strings testers recorded for the Cupra Leon VZ1. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
88.7% of the 371 recorded Cupra Leon VZ1 MOT tests ended in a pass, +7.7 percentage points above the national average. 87.4% of those passed on the first attempt.
2022 is the strongest Cupra Leon VZ1 year on record at 91.1%, while 2021 is the weakest at 86.5%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded Cupra Leon VZ1 failures are "Has a cut in excess of the requirements deep enough to reach the ply or cords" and "Has ply or cords exposed" — together around 6% of tests, mostly in the Tyres section.