Pass rate, every year
270 tests across 3 model years, 2000–2002.
−0.6 pts vs the national average
Pass rate, every year
270 tests across 3 model years, 2000–2002.
−0.6 pts vs the national average
Best year to buy
2002 84.5%
The strongest of the 3 years on record. See the 2002 page →
Worst year to buy
2001 78.0%
6.5 points below the 2002 peak. See the 2001 page →
The Daimler V8 MOT pass rate is 80.4%, −0.6 percentage points below the UK average. That is 270 DVSA MOT tests recorded between 2000 and 2002. This page lists the most common Daimler V8 MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
MOT pass rates are national — type your postcode to see how Daimler V8 MOT pass rates does in your corner of the country.
The Daimler V8 passed on its first attempt in 77.8%, and its overall record sits −0.6 percentage points below the national average for all cars. These figures come from every recorded DVSA MOT test for the Daimler V8 in the 2023–2025 data: 270 tests across 3 model years (2000–2002). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 270 |
| Overall pass rate | 80.4% |
| Passed on first attempt | 77.8% |
| Average mileage at test | 84,821 mi |
| Model years covered | 2000–2002 (3 years) |
| Versus UK national average | −0.6 pts below |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the Daimler V8, the Suspension section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Suspension | 39% |
| Visibility | 19% |
| Noise, emissions and leaks | 17% |
| Brakes | 15% |
| Body, chassis, structure | 7% |
| Lamps, reflectors and electrical equipment | 3% |
Shares are over the Daimler V8's recorded defect strings, merged across its year pages.
Around 39% of the recorded Daimler V8 failures fall in the Suspension section of the MOT inspection manual. Testers recorded "Component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength" (3.3%), "Ball joint dust cover severely deteriorated" (1.9%), "Ball joint dust cover no longer prevents the ingress of dirt" (1.1%) among the Daimler V8's suspension faults.
Around 19% of the recorded Daimler V8 failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Windscreen damaged but not adversely affecting driver's view" (1.1%), "Wipers blade defective" (1.1%), "Washers not working" (1.1%) among the Daimler V8's visibility faults.
Around 17% of the recorded Daimler V8 failures fall in the Noise, emissions and leaks section of the MOT inspection manual. Testers recorded "Catalyst emissions Lambda reading after 2nd fast idle outside specified limits" (1.5%), "Malfunction indicator lamp inoperative or indicates a malfunction" (1.1%), "Catalyst emissions carbon monoxide content after 2nd fast idle exceeds default limits" (0.7%) among the Daimler V8's noise, emissions and leaks faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the Daimler V8, each with how many of the model's 270 tests it was noted on.
The strongest Daimler V8 model year on record is 2002 (84.5% across 58 tests), and the weakest is 2001 (78.0%). The gap between them is 6.5 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
Daimler V8 reliability is improving in the DVSA data — the pass rate moves about 1.6 points a year across the most recent model years shown above.
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this Daimler V8's own most-recorded failure strings, starting with what a tester is most likely to flag on a Daimler V8.
corrosion — “component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength”
Look under the sills, around the jacking points and where the suspension mounts meet the body. Flaking, holed or crumbly metal fails; a brown stain on sound metal does not.
the brake pipes — “rigid brake pipes excessively corroded”
Brake pipes run under the car, usually in front of the rear wheels. Flaking or crusty metal is what fails; a light dusting of surface rust does not. Worth asking a garage to look while it is on a ramp.
the suspension joints — “ball joint dust cover severely deteriorated”
With the car parked on level ground, rock the top of each front wheel in and out while someone watches the suspension arm. Clunks, or rubber boots split and greasy, are what testers record here.
Derived from the DVSA failure strings testers recorded for the Daimler V8. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
80.4% of the 270 recorded Daimler V8 MOT tests ended in a pass, −0.6 percentage points below the national average. 77.8% of those passed on the first attempt.
2002 is the strongest Daimler V8 year on record at 84.5%, while 2001 is the weakest at 78.0%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded Daimler V8 failures are "Component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength" and "Rigid brake pipes excessively corroded" — together around 6% of tests, mostly in the Suspension section.