Calculate my fail sheet

2008 Mazda Bt-50 MOT pass rate

Check your postcode

Pass rate by postcode →

Pass rate

73.6%

Below average — 0.5 pts ahead of the 73.1% that cars this age and mileage manage.

Across 885 recorded tests.

Typical repair bill £50–£134

Which year to buy

  • Best 2009 77.5% pass
  • Avoid 2006 71.5% pass

Across the 5 years on record, a spread of 6 points. See every year →

First-attempt pass
66.3%
Typical mileage
117k mi

The 2008 Mazda Bt-50 MOT pass rate is 73.6% of its MOT tests — about what its age and mileage predict. Brakes is the biggest single reason it fails, at 21.1% of what testers record.

MOT PASS RATES

The 2008 Mazda Bt-50 on the real record

73.6% of 2008 Mazda Bt-50 MOTs passed — 885 tests, 2023–2025

Pass rate

The answer from the DVSA's class-4 MOT records.

Expert verdict

Body & chassis: 2.4× the national share

Body & chassis accounts for 13.6% of everything recorded on the 2008 Mazda Bt-50, against 5.6% nationally — 8.0 points above. Brakes are still the single largest share at 21.1%, but at 20.9% nationally that one is ordinary. Look underneath for corrosion near the jacking points and suspension mounts; surface rust is normal, flaking metal is not.

Written from this page's own figures: fault shares against the national composition, the like-for-like pass rate, and the priced repair list. How these are worked out

Watching a Mazda Bt-50? Get an email when these numbers change .

How does the 2008 Mazda Bt-50 compare?

Cars of this age and mileage average 73.1%, so this figure is 0.5 points ahead of what its age and mileage predict. On a first attempt, before any retests, the figure drops to 66.3%. The median 2008 Mazda Bt-50 in this dataset had covered 116,537 mi.

Pass rates also shift with the test month: tests recorded October–March passed 75.5% of the time, April–September 71.4%.

The single most recorded failure item is "Windscreen damaged but not adversely affecting driver's view", noted on 7.23% of tests.

  • 885 recorded tests behind this page.
  • 73.6% overall pass rate, 66.3% on a first attempt.
  • Across every year of the Mazda Bt-50, the average is 75.3% — best year 2009 (77.5%), worst 2006 (71.5%).

Figures count every completed test on this vehicle-year in the dataset, including retests. See methodology for the exact definition.

This page's data

Tests analysed
885
Typical mileage (median)
116,537 mi
Make and model
Mazda Bt-50
Updated
2026-11-07

Source: DVSA anonymised MOT test data (2023–2025), OGL v3.0.

Top part to budget for

Windscreen

Typically a garage job — get quotes before committing.

Does mileage affect the Bt-50 MOT pass rate?

0-30k 100.0%
30-60k 79.3%
60-90k 78.4%
90-120k 75.8%
120k+ 69.1%

Pass rate by odometer reading. Bar lengths start at 61% so small gaps stay visible.

Where the Mazda Bt-50 is most common

Across all Bt-50 model years on record (2006–2010): 1,171 Mazda Bt-50 cars tested in a recordable postcode area, across 3,060 tests. Ashford (TN) has the most, with 40 cars tested there. Cars are counted by the postcode area of the MOT station, so this is where they were tested, not necessarily where their owners live.

# Postcode area Cars Share of all Tests Pass rate
1 Ashford (TN) 40 3.4% 105 73.3%
2 Exeter (EX) 33 2.8% 96 68.8%
3 Swansea (SA) 32 2.7% 101 69.3%
4 Ipswich (IP) 30 2.6% 87 78.2%
5 Portsmouth (PO) 30 2.6% 79 84.8%
6 Norwich (NR) 28 2.4% 87 74.7%
7 Peterborough (PE) 28 2.4% 74 77.0%
8 Guildford (GU) 27 2.3% 61 75.4%
9 Sheffield (S) 25 2.1% 68 69.1%
10 Crawley (RH) 25 2.1% 67 79.1%
11 Chelmsford (CM) 23 2% 61 75.4%
12 Lincoln (LN) 22 1.9% 72 65.3%
13 Leicester (LE) 21 1.8% 62 75.8%
14 Gloucester (GL) 21 1.8% 57 70.2%
15 Shrewsbury (SY) 21 1.8% 51 82.4%
16 Brighton (BN) 21 1.8% 45 80.0%
17 Bradford (BD) 20 1.7% 45 80.0%
18 Coventry (CV) 19 1.6% 58 70.7%
19 Reading (RG) 19 1.6% 40 87.5%
20 Wrexham (LL) 18 1.5% 57 70.2%

The twenty areas with the most Mazda Bt-50 cars in the record, sorted by car count — sort the columns for a different question. Cars tested at a station whose postcode area could not be resolved are counted in the model's total but in no area, so the shares add up to slightly under 100% even across every area, and an area's cars are a subset of the model's. Pass rate is blank below 30 tests in an area, where a percentage is noise rather than a finding. How this model's pass rate varies by postcode →

Regional pass rates for the Bt-50

Region Tests Pass rate
South West 168 67.3%
South East 144 78.5%
East of England 142 80.3%
West Midlands 103 69.9%
Yorkshire 90 73.3%
East Midlands 70 67.1%
Wales 67 71.6%
North West 48 83.3%
Scotland 36 58.3%

Regions come from the postcode area recorded at the test station. Areas on region borders are assigned to the region with the majority of their population.

What fails a 2008 Bt-50

Everything a tester recorded on this vehicle, grouped into the inspection sections that produced it. The notch on each bar is the national share, so you can see at a glance whether this car is unusual or just ordinary.

Brakes 21.1%
in line with the national share national 20.9% Price brakes parts
Suspension 18.6%
−2.4 pts vs national national 21.0% Price suspension parts
Lamps & electrics 17.5%
+5.3 pts vs national national 12.2% Order bulbs & wipers
Body & chassis 13.6%
+8.0 pts vs national national 5.6% Find body panels
Show the other 6 fault categories
  • Tyres 7.3%
  • Emissions & leaks 6.0%
  • Visibility 5.8%
  • Steering 5.4%
  • Identification 3.0%
  • Advisories 1.1%

Shares are of every item recorded on 2008 Mazda Bt-50 tests — a composition, so they add to 100% across all sections, not per test.

A test can record several items, so these percentages do not add up to 100%. The exact strings, with prices, are in the full DVSA record at the bottom of this page.

Before your test

Three checks worth doing on a 2008 Bt-50

These are not generic tips — they are the faults recorded most often on this exact model, rewritten as things you can check yourself. All three take about ten minutes and cost nothing.

  1. Check the windscreen 7.2% of tests

    “windscreen damaged”

    Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.

  2. Check the lights 6.7% of tests

    “registration plate lamp(s) inoperative in the case of multiple lamps or light sources”

    Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.

  3. Check the brake pipes 3.7% of tests

    “rigid brake pipes excessively corroded”

    Brake pipes run under the car, usually in front of the rear wheels. Flaking or crusty metal is what fails; a light dusting of surface rust does not. Worth asking a garage to look while it is on a ramp.

Shares are the proportion of tests on this vehicle that recorded the item, so they overlap: one test can record several.

What it costs to get a 2008 Bt-50 through its MOT

Across the 10 items that are recorded most often on this model, the average repair comes to £50–£134 — and 55% of those repairs are parts that cost under £30.

Average repair across the 10 common items
£50–£134
Cheapest common item: malfunction indicator lamp inoperative or…
£3–£12
Dearest common item: component mounting prescribed areas…
£180–£450
Common items a careful owner can do at home
50%
Repairs that still cost under £30
55%

Estimates from typical UK parts prices, weighted by how often each item appears in 885 MOT tests on this vehicle. They exclude diagnostics, retest fees and garage labour where the part is a DIY fit, and they are not figures from the DVSA dataset. Older and higher-mileage examples cost more than the average. How these estimates are built → · All MOT repair costs → · Cheapest cars to put through a test →

Every year of the Bt-50, side by side

5 model years on record, from 2006 to 2010. Across them the pass rate runs from 71.5% to 77.5% — a spread of 6 points. The bar under each year is the item that failed it most often.

  1. 2006 71.5% registration plate lamp(s)…
  2. 2007 75.6% windscreen damaged but not…
  3. 2008 73.6%
    windscreen damaged but not…
  4. 2009 77.5% registration plate lamp(s)…
  5. 2010 75.0% windscreen damaged but not…

Colour is the pass rate on a fixed scale, so a block means the same thing on any model. Each year links to its own page with the full fault breakdown.

Compare the 2008 Mazda Bt-50 with another year

The raw pass rate mostly measures age. The year comparison adds the like-for-like figure, the mileage bands and the repair bill.

Compare 2008 with another year →

Compare two different cars instead →

Other 2008 cars with a similar record

Closest pass rates among 2008 cars with at least 2,000 tests, so a small sample cannot flatter itself into the list. See the full rankings: best and worst MOT pass rates.

The full DVSA record for the 2008 Mazda Bt-50 10 failure items · 6 advisories · 10 inspection categories · mileage brackets · all of it in the page, none of it above the fold

Every inspection category

Shares of the 2,876 individual items recorded on this vehicle, and the same share across all cars nationally. A single test can record several items, so a row is not a percentage of tests.

Category Items This car Nationally Difference
Brakes 610 21.10% 20.89% +0.21
Suspension 540 18.60% 20.98% −2.38
Lamps, reflectors and electrical equipment 506 17.50% 12.21% +5.29
Body, chassis, structure 394 13.60% 5.57% +8.03
Tyres 211 7.30% 19.76% −12.46
Noise, emissions and leaks 175 6.00% 5.52% +0.48
Visibility 167 5.80% 4.97% +0.83
Steering 155 5.40% 2.57% +2.83
Identification of the vehicle 87 3.00% 1.76% +1.24
Non-component advisories 31 1.10% 4.18% −3.08

The exact failure items, in the tester's words

Share of the 885 tests on this vehicle that recorded each item
Recorded item Severity Tests Est. cost Part
Windscreen damaged but not adversely affecting driver's view Visibility Minor 7.2% £80–200 Windscreen →
Registration plate lamp(s) inoperative in the case of multiple lamps or light sources Lamps, reflectors and electrical equipment Minor 6.7% £5–20 Number Plate Lamp →
Position lamp not working Lamps, reflectors and electrical equipment Major 6.0% £5–25 Headlight Bulb →
Headlamp lens slightly defective Lamps, reflectors and electrical equipment Minor 5.8% £5–25 Headlight Bulb →
Rear fog lamp not working Lamps, reflectors and electrical equipment Major 4.0% £3–15 Bulb →
Joints constant velocity boot severely deteriorated Body, chassis, structure Minor 3.7% £80–250 Body Panel Repair →
Rigid brake pipes excessively corroded Brakes Major 3.7% £80–180 Brake Pipe →
Component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength Suspension Major 3.3% £180–450 Corrosion Welding Repair →
Malfunction indicator lamp inoperative or indicates a malfunction Noise, emissions and leaks Major 2.5% £3–12 Indicator Bulb →
Chassis condition or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Body, chassis, structure Major 2.1% £180–450 Corrosion Welding Repair →

Severity is as recorded: Major and Dangerous fail the test outright; Minor and Advisory do not. Costs are estimates from typical UK parts prices — see how they are built.

What testers noted without failing the car

Advisories are the early warnings — the same parts a year or two before they fail. Reading them is how you tell a car that has been maintained from one that has been patched.

Items recorded as advisory on this vehicle
Recorded item Severity Tests Est. cost
Rigid brake pipes excessively corroded Brakes Advisory 30.4% £80–180
Wheel bearings has excessive play Suspension Advisory 15.6% £20–55
Engine oil leaks leaking excessively from engine Noise, emissions and leaks Advisory 13.3% £200–700
Tread depth below requirements of 1.6mm Tyres Advisory 12.9% £45–95
Chassis condition corroded to the extent that the rigidity of the assembly is significantly reduced Body, chassis, structure Advisory 9.8% £180–450
Registration plates inscription illegible Identification of the vehicle Advisory 8.3% £20–80

Pass rate by mileage

Mileage Tests Pass rate Median odometer
0-30k 6 100.0% 27,640 mi
30-60k 82 79.3% 47,569 mi
60-90k 162 78.4% 77,507 mi
90-120k 215 75.8% 103,766 mi
120k+ 417 69.1% 152,755 mi

Source: 885 recorded tests on this vehicle-year. Every row above is recomputed from the same DVSA extract as the rest of the page — see the methodology.

2008 Bt-50 MOT questions

What is the MOT pass rate for a 2008 Mazda Bt-50?

73.6% of the 885 2008 Mazda Bt-50 tests in this dataset passed, against a national average of 73.1% for cars first used in 2008. First-attempt pass rate: 66.3%.

What are the most common MOT failures on a 2008 Mazda Bt-50?

The three most recorded items are windscreen damaged but not adversely affecting driver's view (7.23%), registration plate lamp(s) inoperative in the case of multiple lamps or light sources (6.67%), position lamp not working (5.99%). Percentages are the share of tests on this vehicle that recorded the item.

Does mileage affect the 2008 Mazda Bt-50 MOT pass rate?

Yes. Cars under 30,000 miles passed 100.0% of the time, falling to 69.1% for those over 120,000 miles. The median 2008 Mazda Bt-50 in this dataset had covered 116,537 mi.

Does the season affect the 2008 Mazda Bt-50 MOT pass rate?

Tests recorded in the winter months (October–March) passed 75.5% of the time; summer months (April–September) passed 71.4%. Brakes, tyres and lights are tested harder in bad weather, but the difference is small on most models.