Pass rate, every year
727 tests across 8 model years, 2009–2016.
−0.4 pts vs the national average
Pass rate, every year
727 tests across 8 model years, 2009–2016.
−0.4 pts vs the national average
Best year to buy
2016 91.4%
The strongest of the 8 years on record. See the 2016 page →
Worst year to buy
2011 74.2%
17.2 points below the 2016 peak. See the 2011 page →
The Mercedes-Benz 250 MOT pass rate is 80.6%, −0.4 percentage points below the UK average. That is 727 DVSA MOT tests recorded between 2009 and 2016. This page lists the most common Mercedes-Benz 250 MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
MOT pass rates are national — type your postcode to see how Mercedes-Benz 250 MOT pass rates does in your corner of the country.
The Mercedes-Benz 250 passed on its first attempt in 76.6%, and its overall record sits −0.4 percentage points below the national average for all cars. These figures come from every recorded DVSA MOT test for the Mercedes-Benz 250 in the 2023–2025 data: 727 tests across 8 model years (2009–2016). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 727 |
| Overall pass rate | 80.6% |
| Passed on first attempt | 76.6% |
| Average mileage at test | 95,469 mi |
| Model years covered | 2009–2016 (8 years) |
| Versus UK national average | −0.4 pts below |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the Mercedes-Benz 250, the Suspension section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Suspension | 40% |
| Lamps, reflectors and electrical equipment | 16% |
| Brakes | 13% |
| Tyres | 12% |
| Visibility | 10% |
| Noise, emissions and leaks | 8% |
| Body, chassis, structure | 1% |
Shares are over the Mercedes-Benz 250's recorded defect strings, merged across its year pages.
Around 40% of the recorded Mercedes-Benz 250 failures fall in the Suspension section of the MOT inspection manual. Testers recorded "Ball joint dust cover severely deteriorated" (3.0%), "Ball joint excessively worn" (2.9%), "Coil spring fractured or broken" (2.3%) among the Mercedes-Benz 250's suspension faults.
Around 16% of the recorded Mercedes-Benz 250 failures fall in the Lamps, reflectors and electrical equipment section of the MOT inspection manual. Testers recorded "Registration plate lamp(s) inoperative in the case of multiple lamps or light sources" (1.1%), "Stop lamp with a multiple light source up to 1/2 not functioning" (0.7%), "Registration plate lamp(s) missing in the case of multiple lamps or light sources" (0.7%) among the Mercedes-Benz 250's lamps, reflectors and electrical equipment faults.
Around 13% of the recorded Mercedes-Benz 250 failures fall in the Brakes section of the MOT inspection manual. Testers recorded "Rigid brake pipes excessively corroded" (2.1%), "Brake discs significantly and obviously worn" (0.3%), "Brake performance not tested unable to be tested" (0.3%) among the Mercedes-Benz 250's brakes faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the Mercedes-Benz 250, each with how many of the model's 727 tests it was noted on.
The strongest Mercedes-Benz 250 model year on record is 2016 (91.4% across 58 tests), and the weakest is 2011 (74.2%). The gap between them is 17.2 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
Mercedes-Benz 250 reliability is improving in the DVSA data — the pass rate moves about 3.7 points a year across the most recent model years shown above.
| Year | Tests | Pass rate |
|---|---|---|
| 2016 250 | 58 | 91.4% |
| 2015 250 | 63 | 88.9% |
| 2014 250 | 86 | 87.2% |
| 2013 250 | 72 | 81.9% |
| 2012 250 | 176 | 76.7% |
| 2011 250 | 93 | 74.2% |
| 2010 250 | 105 | 77.1% |
| 2009 250 | 74 | 78.4% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this Mercedes-Benz 250's own most-recorded failure strings, starting with what a tester is most likely to flag on a Mercedes-Benz 250.
the suspension joints — “ball joint dust cover severely deteriorated”
With the car parked on level ground, rock the top of each front wheel in and out while someone watches the suspension arm. Clunks, or rubber boots split and greasy, are what testers record here.
the coil springs — “coil spring fractured or broken”
Look up inside each wheel arch with a torch, all the way round the spring. A snapped spring usually breaks at the very bottom coil, where a quick glance will not reach.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
Derived from the DVSA failure strings testers recorded for the Mercedes-Benz 250. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
80.6% of the 727 recorded Mercedes-Benz 250 MOT tests ended in a pass, −0.4 percentage points below the national average. 76.6% of those passed on the first attempt.
2016 is the strongest Mercedes-Benz 250 year on record at 91.4%, while 2011 is the weakest at 74.2%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded Mercedes-Benz 250 failures are "Ball joint dust cover severely deteriorated" and "Ball joint excessively worn" — together around 6% of tests, mostly in the Suspension section.