Pass rate, every year
269 tests across 2 model years, 2021–2022.
+10.8 pts vs the national average
Pass rate, every year
269 tests across 2 model years, 2021–2022.
+10.8 pts vs the national average
Best year to buy
2022 92.2%
The strongest of the 2 years on record. See the 2022 page →
Worst year to buy
2021 91.7%
0.5 points below the 2022 peak. See the 2021 page →
The SEAT Leon Xcellence Etsi MOT pass rate is 91.8%, +10.8 percentage points above the UK average. That is 269 DVSA MOT tests recorded between 2021 and 2022. This page lists the most common SEAT Leon Xcellence Etsi MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
MOT pass rates are national — type your postcode to see how SEAT Leon Xcellence Etsi MOT pass rates does in your corner of the country.
The SEAT Leon Xcellence Etsi passed on its first attempt in 91.2%, and its overall record sits +10.8 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the SEAT Leon Xcellence Etsi in the 2023–2025 data: 269 tests across 2 model years (2021–2022). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 269 |
| Overall pass rate | 91.8% |
| Passed on first attempt | 91.2% |
| Average mileage at test | 27,297 mi |
| Model years covered | 2021–2022 (2 years) |
| Versus UK national average | +10.8 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the SEAT Leon Xcellence Etsi, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Tyres | 44% |
| Visibility | 18% |
| Seat belts and supplementary restraint systems | 18% |
| Suspension | 9% |
| Lamps, reflectors and electrical equipment | 6% |
| Brakes | 3% |
| Road Wheels | 3% |
Shares are over the SEAT Leon Xcellence Etsi's recorded defect strings, merged across its year pages.
Around 44% of the recorded SEAT Leon Xcellence Etsi failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Tread depth below requirements of 1.6mm" (2.6%), "Has a cut in excess of the requirements deep enough to reach the ply or cords" (2.2%), "Has ply or cords exposed" (0.4%) among the SEAT Leon Xcellence Etsi's tyres faults.
Around 18% of the recorded SEAT Leon Xcellence Etsi failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Wipers blade defective" (1.1%), "Windscreen damaged but not adversely affecting driver's view" (0.7%), "Wipers does not clear the windscreen effectively" (0.4%) among the SEAT Leon Xcellence Etsi's visibility faults.
Around 18% of the recorded SEAT Leon Xcellence Etsi failures fall in the Seat belts and supplementary restraint systems section of the MOT inspection manual. Testers recorded "Buckle not functioning as intended" (1.5%), "Requirements missing" (0.4%), "Srs malfunction indicator lamp warning lamp indicates a fault" (0.4%) among the SEAT Leon Xcellence Etsi's seat belts and supplementary restraint systems faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the SEAT Leon Xcellence Etsi, each with how many of the model's 269 tests it was noted on.
The strongest SEAT Leon Xcellence Etsi model year on record is 2022 (92.2% across 64 tests), and the weakest is 2021 (91.7%). The gap between them is 0.5 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
| Year | Tests | Pass rate |
|---|---|---|
| 2022 Leon Xcellence Etsi | 64 | 92.2% |
| 2021 Leon Xcellence Etsi | 205 | 91.7% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this SEAT Leon Xcellence Etsi's own most-recorded failure strings, starting with what a tester is most likely to flag on a SEAT Leon Xcellence Etsi.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
the wipers and washers — “wipers blade defective”
Run the wipers with the screen wet: they should clear it in one sweep without smearing or juddering. Top the washer bottle up and check both jets hit the screen.
the shock absorbers — “shock absorbers has a serious fluid leak”
Press down hard on each corner of the car and let go. It should settle in one bounce; if it keeps rocking, or you can see oil weeping down a shock absorber, that is the fault a tester will find.
Derived from the DVSA failure strings testers recorded for the SEAT Leon Xcellence Etsi. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
91.8% of the 269 recorded SEAT Leon Xcellence Etsi MOT tests ended in a pass, +10.8 percentage points above the national average. 91.2% of those passed on the first attempt.
2022 is the strongest SEAT Leon Xcellence Etsi year on record at 92.2%, while 2021 is the weakest at 91.7%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded SEAT Leon Xcellence Etsi failures are "Tread depth below requirements of 1.6mm" and "Has a cut in excess of the requirements deep enough to reach the ply or cords" — together around 5% of tests, mostly in the Tyres section.