Pass rate, every year
3,623 tests across 5 model years, 2018–2022.
+10.7 pts vs the national average
Pass rate, every year
3,623 tests across 5 model years, 2018–2022.
+10.7 pts vs the national average
Best year to buy
2018 92.2%
The strongest of the 5 years on record. See the 2018 page →
Worst year to buy
2020 90.6%
1.6 points below the 2018 peak. See the 2020 page →
The BMW 220I Luxury MOT pass rate is 91.7%, +10.7 percentage points above the UK average. That is 3,623 DVSA MOT tests recorded between 2018 and 2022. This page lists the most common BMW 220I Luxury MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
MOT pass rates are national — type your postcode to see how BMW 220I Luxury MOT pass rates does in your corner of the country.
The BMW 220I Luxury passed on its first attempt in 91.1%, and its overall record sits +10.7 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the BMW 220I Luxury in the 2023–2025 data: 3,623 tests across 5 model years (2018–2022). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 3,623 |
| Overall pass rate | 91.7% |
| Passed on first attempt | 91.1% |
| Average mileage at test | 27,238 mi |
| Model years covered | 2018–2022 (5 years) |
| Versus UK national average | +10.7 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the BMW 220I Luxury, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Tyres | 49% |
| Visibility | 30% |
| Lamps, reflectors and electrical equipment | 13% |
| Brakes | 5% |
| Suspension | 2% |
| Identification of the vehicle | 1% |
| Road Wheels | 1% |
Shares are over the BMW 220I Luxury's recorded defect strings, merged across its year pages.
Around 49% of the recorded BMW 220I Luxury failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Has a cut in excess of the requirements deep enough to reach the ply or cords" (2.8%), "Tread depth below requirements of 1.6mm" (0.6%), "Has ply or cords exposed" (0.5%) among the BMW 220I Luxury's tyres faults.
Around 30% of the recorded BMW 220I Luxury failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Windscreen damaged but not adversely affecting driver's view" (1.2%), "Wipers blade defective" (0.5%), "Washers provides insufficient washer liquid" (0.5%) among the BMW 220I Luxury's visibility faults.
Around 13% of the recorded BMW 220I Luxury failures fall in the Lamps, reflectors and electrical equipment section of the MOT inspection manual. Testers recorded "Headlamp aim too low" (0.6%), "Headlamp aim projected beam image is obviously incorrect" (0.2%), "Stop lamp not working" (0.1%) among the BMW 220I Luxury's lamps, reflectors and electrical equipment faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the BMW 220I Luxury, each with how many of the model's 3,623 tests it was noted on.
The strongest BMW 220I Luxury model year on record is 2018 (92.2% across 666 tests), and the weakest is 2020 (90.6%). The gap between them is 1.6 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
| Year | Tests | Pass rate |
|---|---|---|
| 2022 220I Luxury | 141 | 92.2% |
| 2021 220I Luxury | 102 | 91.2% |
| 2020 220I Luxury | 716 | 90.6% |
| 2019 220I Luxury | 1,998 | 92.0% |
| 2018 220I Luxury | 666 | 92.2% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this BMW 220I Luxury's own most-recorded failure strings, starting with what a tester is most likely to flag on a BMW 220I Luxury.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
the lights — “headlamp aim too low”
Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.
Derived from the DVSA failure strings testers recorded for the BMW 220I Luxury. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
91.7% of the 3,623 recorded BMW 220I Luxury MOT tests ended in a pass, +10.7 percentage points above the national average. 91.1% of those passed on the first attempt.
2018 is the strongest BMW 220I Luxury year on record at 92.2%, while 2020 is the weakest at 90.6%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded BMW 220I Luxury failures are "Has a cut in excess of the requirements deep enough to reach the ply or cords" and "Windscreen damaged but not adversely affecting driver's view" — together around 4% of tests, mostly in the Tyres section.