Pass rate, every year
765 tests across 2 model years, 2021–2022.
+7.3 pts vs the national average
Pass rate, every year
765 tests across 2 model years, 2021–2022.
+7.3 pts vs the national average
Best year to buy
2022 88.4%
The strongest of the 2 years on record. See the 2022 page →
Worst year to buy
2021 88.3%
0.1 points below the 2022 peak. See the 2021 page →
The BMW 430D MOT pass rate is 88.3%, +7.3 percentage points above the UK average. That is 765 DVSA MOT tests recorded between 2021 and 2022. This page lists the most common BMW 430D MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
The BMW 430D passed on its first attempt in 86.9%, and its overall record sits +7.3 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the BMW 430D in the 2023–2025 data: 765 tests across 2 model years (2021–2022). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 765 |
| Overall pass rate | 88.3% |
| Passed on first attempt | 86.9% |
| Average mileage at test | 31,539 mi |
| Model years covered | 2021–2022 (2 years) |
| Versus UK national average | +7.3 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the BMW 430D, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Tyres | 75% |
| Visibility | 12% |
| Lamps, reflectors and electrical equipment | 5% |
| Road Wheels | 3% |
| Noise, emissions and leaks | 2% |
| Identification of the vehicle | 2% |
| Suspension | 1% |
Shares are over the BMW 430D's recorded defect strings, merged across its year pages.
Around 75% of the recorded BMW 430D failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Has a cut in excess of the requirements deep enough to reach the ply or cords" (3.7%), "Has ply or cords exposed" (3.5%), "Has a bulge, caused by separation or partial failure of its structure" (3.1%) among the BMW 430D's tyres faults.
Around 12% of the recorded BMW 430D failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Windscreen damaged but not adversely affecting driver's view" (1.4%), "Wipers blade defective" (0.5%) among the BMW 430D's visibility faults.
Around 5% of the recorded BMW 430D failures fall in the Lamps, reflectors and electrical equipment section of the MOT inspection manual. Testers recorded "Side repeaters not working" (0.4%), "Headlamp aim too high" (0.4%) among the BMW 430D's lamps, reflectors and electrical equipment faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the BMW 430D, each with how many of the model's 765 tests it was noted on.
The strongest BMW 430D model year on record is 2022 (88.4% across 337 tests), and the weakest is 2021 (88.3%). The gap between them is 0.1 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this BMW 430D's own most-recorded failure strings, starting with what a tester is most likely to flag on a BMW 430D.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
the wipers and washers — “wipers blade defective”
Run the wipers with the screen wet: they should clear it in one sweep without smearing or juddering. Top the washer bottle up and check both jets hit the screen.
Derived from the DVSA failure strings testers recorded for the BMW 430D. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
88.3% of the 765 recorded BMW 430D MOT tests ended in a pass, +7.3 percentage points above the national average. 86.9% of those passed on the first attempt.
2022 is the strongest BMW 430D year on record at 88.4%, while 2021 is the weakest at 88.3%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded BMW 430D failures are "Has a cut in excess of the requirements deep enough to reach the ply or cords" and "Has ply or cords exposed" — together around 7% of tests, mostly in the Tyres section.