Pass rate, every year
2,300 tests across 3 model years, 2020–2022.
+10.1 pts vs the national average
Pass rate, every year
2,300 tests across 3 model years, 2020–2022.
+10.1 pts vs the national average
Best year to buy
2020 93.2%
The strongest of the 3 years on record. See the 2020 page →
Worst year to buy
2021 90.8%
2.4 points below the 2020 peak. See the 2021 page →
The BMW 430I MOT pass rate is 91.1%, +10.1 percentage points above the UK average. That is 2,300 DVSA MOT tests recorded between 2020 and 2022. This page lists the most common BMW 430I MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
The BMW 430I passed on its first attempt in 90.4%, and its overall record sits +10.1 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the BMW 430I in the 2023–2025 data: 2,300 tests across 3 model years (2020–2022). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 2,300 |
| Overall pass rate | 91.1% |
| Passed on first attempt | 90.4% |
| Average mileage at test | 26,453 mi |
| Model years covered | 2020–2022 (3 years) |
| Versus UK national average | +10.1 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the BMW 430I, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Tyres | 73% |
| Visibility | 15% |
| Lamps, reflectors and electrical equipment | 11% |
| Suspension | 2% |
Shares are over the BMW 430I's recorded defect strings, merged across its year pages.
Around 73% of the recorded BMW 430I failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Has a bulge, caused by separation or partial failure of its structure" (2.7%), "Has a cut in excess of the requirements deep enough to reach the ply or cords" (2.6%), "Tread depth below requirements of 1.6mm" (1.3%) among the BMW 430I's tyres faults.
Around 15% of the recorded BMW 430I failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Windscreen damaged but not adversely affecting driver's view" (0.9%), "Wipers blade defective" (0.5%), "Washers provides insufficient washer liquid" (0.2%) among the BMW 430I's visibility faults.
Around 11% of the recorded BMW 430I failures fall in the Lamps, reflectors and electrical equipment section of the MOT inspection manual. Testers recorded "Headlamp aim too high" (0.6%), "Side repeaters not working" (0.5%), "Rear reflectors not red in colour" (0.1%) among the BMW 430I's lamps, reflectors and electrical equipment faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the BMW 430I, each with how many of the model's 2,300 tests it was noted on.
The strongest BMW 430I model year on record is 2020 (93.2% across 177 tests), and the weakest is 2021 (90.8%). The gap between them is 2.4 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
BMW 430I reliability is declining in the DVSA data — the pass rate moves about 1.0 points a year across the most recent model years shown above.
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this BMW 430I's own most-recorded failure strings, starting with what a tester is most likely to flag on a BMW 430I.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
the lights — “headlamp aim too high”
Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.
Derived from the DVSA failure strings testers recorded for the BMW 430I. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
Across every 430I model year on record (2020–2022): 1,644 BMW 430I cars tested in a recordable postcode area, across 2,300 tests. Birmingham (B) has the most, with 57 cars tested there. Cars are counted by the postcode area of the MOT station, so this is where they were tested, not necessarily where their owners live.
| # | Postcode area | Cars | Pass rate |
|---|---|---|---|
| 1 | Birmingham (B) | 57 | 96.1% |
| 2 | Reading (RG) | 47 | 91.0% |
| 3 | Guildford (GU) | 40 | 88.5% |
| 4 | Stockport (SK) | 35 | 97.8% |
| 5 | Kingston upon Thames (KT) | 34 | 90.9% |
| 6 | Northampton (NN) | 33 | 94.0% |
| 7 | Peterborough (PE) | 32 | 92.0% |
| 8 | Sheffield (S) | 30 | 91.1% |
| 9 | Bristol (BS) | 30 | 88.1% |
| 10 | Swindon (SN) | 29 | 97.2% |
| 11 | Chelmsford (CM) | 29 | 88.6% |
| 12 | Gloucester (GL) | 29 | 97.1% |
| 13 | Brighton (BN) | 27 | 88.1% |
| 14 | Manchester (M) | 27 | 87.5% |
| 15 | Portsmouth (PO) | 27 | 77.5% |
| 16 | Ashford (TN) | 27 | 89.7% |
| 17 | Coventry (CV) | 27 | 97.4% |
| 18 | Cardiff (CF) | 27 | 91.2% |
| 19 | London (SE) | 25 | 88.6% |
| 20 | Slough (SL) | 25 | 90.6% |
The twenty areas with the most BMW 430I cars in the record, sorted by car count — sort the columns for a different question. Cars tested at a station whose postcode area could not be resolved are counted in the model's total but in no area, so the shares add up to slightly under 100% even across every area, and an area's cars are a subset of the model's. Pass rate is blank below 30 tests in an area, where a percentage is noise rather than a finding. How this model's pass rate varies by postcode →
91.1% of the 2,300 recorded BMW 430I MOT tests ended in a pass, +10.1 percentage points above the national average. 90.4% of those passed on the first attempt.
2020 is the strongest BMW 430I year on record at 93.2%, while 2021 is the weakest at 90.8%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded BMW 430I failures are "Has a bulge, caused by separation or partial failure of its structure" and "Has a cut in excess of the requirements deep enough to reach the ply or cords" — together around 5% of tests, mostly in the Tyres section.