Pass rate, every year
1,524 tests across 3 model years, 2007–2009.
−6.7 pts vs the national average
Pass rate, every year
1,524 tests across 3 model years, 2007–2009.
−6.7 pts vs the national average
Best year to buy
2009 74.7%
The strongest of the 3 years on record. See the 2009 page →
Worst year to buy
2008 73.8%
0.9 points below the 2009 peak. See the 2008 page →
The Chrysler Sebring MOT pass rate is 74.3%, −6.7 percentage points below the UK average. That is 1,524 DVSA MOT tests recorded between 2007 and 2009. This page lists the most common Chrysler Sebring MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
The Chrysler Sebring passed on its first attempt in 68.2%, and its overall record sits −6.7 percentage points below the national average for all cars. These figures come from every recorded DVSA MOT test for the Chrysler Sebring in the 2023–2025 data: 1,524 tests across 3 model years (2007–2009). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 1,524 |
| Overall pass rate | 74.3% |
| Passed on first attempt | 68.2% |
| Average mileage at test | 87,984 mi |
| Model years covered | 2007–2009 (3 years) |
| Versus UK national average | −6.7 pts below |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the Chrysler Sebring, the Lamps, reflectors and electrical equipment section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Lamps, reflectors and electrical equipment | 40% |
| Suspension | 24% |
| Noise, emissions and leaks | 10% |
| Steering | 10% |
| Brakes | 9% |
| Visibility | 5% |
| Seat belts and supplementary restraint systems | 2% |
Shares are over the Chrysler Sebring's recorded defect strings, merged across its year pages.
Around 40% of the recorded Chrysler Sebring failures fall in the Lamps, reflectors and electrical equipment section of the MOT inspection manual. Testers recorded "Registration plate lamp(s) inoperative in the case of multiple lamps or light sources" (5.7%), "Position lamp not working" (5.1%), "Headlamp lens slightly defective" (1.8%) among the Chrysler Sebring's lamps, reflectors and electrical equipment faults.
Around 24% of the recorded Chrysler Sebring failures fall in the Suspension section of the MOT inspection manual. Testers recorded "Ball joint excessively worn" (5.2%), "Ball joint dust cover severely deteriorated" (3.7%) among the Chrysler Sebring's suspension faults.
Around 10% of the recorded Chrysler Sebring failures fall in the Noise, emissions and leaks section of the MOT inspection manual. Testers recorded "Malfunction indicator lamp inoperative or indicates a malfunction" (3.7%) among the Chrysler Sebring's noise, emissions and leaks faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the Chrysler Sebring, each with how many of the model's 1,524 tests it was noted on.
The strongest Chrysler Sebring model year on record is 2009 (74.7% across 744 tests), and the weakest is 2008 (73.8%). The gap between them is 0.9 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
| Year | Tests | Pass rate |
|---|---|---|
| 2009 Sebring | 744 | 74.7% |
| 2008 Sebring | 568 | 73.8% |
| 2007 Sebring | 212 | 74.5% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this Chrysler Sebring's own most-recorded failure strings, starting with what a tester is most likely to flag on a Chrysler Sebring.
the lights — “registration plate lamp(s) inoperative in the case of multiple lamps or light sources”
Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.
the suspension joints — “ball joint excessively worn”
With the car parked on level ground, rock the top of each front wheel in and out while someone watches the suspension arm. Clunks, or rubber boots split and greasy, are what testers record here.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
Derived from the DVSA failure strings testers recorded for the Chrysler Sebring. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
74.3% of the 1,524 recorded Chrysler Sebring MOT tests ended in a pass, −6.7 percentage points below the national average. 68.2% of those passed on the first attempt.
2009 is the strongest Chrysler Sebring year on record at 74.7%, while 2008 is the weakest at 73.8%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded Chrysler Sebring failures are "Registration plate lamp(s) inoperative in the case of multiple lamps or light sources" and "Ball joint excessively worn" — together around 11% of tests, mostly in the Lamps, reflectors and electrical equipment section.