Ford Connect MOT Pass Rate & Official DVSA Failure Statistics

Ford Connect MOT History and Failure Rates vs UK National Average

The Ford Connect passed on its first attempt in 52.1%, and its overall record sits −15.4 percentage points below the national average for all cars. These figures come from every recorded DVSA MOT test for the Ford Connect in the 2023–2025 data: 479 tests across 3 model years (2007–2009). A test still carries exactly one pass or fail verdict.

Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.

Most Common Ford Connect MOT Problems by Failure Category

Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the Ford Connect, the Lamps, reflectors and electrical equipment section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.

Shares are over the Ford Connect's recorded defect strings, merged across its year pages.

Top Recorded Ford Connect DVSA MOT Test Statistics & Defect Descriptions

The descriptions below are the exact DVSA failure strings testers recorded most often for the Ford Connect, each with how many of the model's 479 tests it was noted on.

• "Registration plate lamp(s) inoperative in the case of multiple lamps or light sources" (Minor) — noted on about 56 Ford Connect tests, 11.7% of the model's MOT record.
• "Joints constant velocity boot severely deteriorated" (Minor) — noted on about 50 Ford Connect tests, 10.4% of the model's MOT record.
• "Windscreen damaged but not adversely affecting driver's view" (Minor) — noted on about 39 Ford Connect tests, 8.1% of the model's MOT record.
• "Component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength" (Major) — noted on about 38 Ford Connect tests, 7.9% of the model's MOT record.
• "Ball joint dust cover severely deteriorated" (Minor) — noted on about 31 Ford Connect tests, 6.5% of the model's MOT record.
• "Rigid brake pipes excessively corroded" (Major) — noted on about 26 Ford Connect tests, 5.4% of the model's MOT record.

Best and Worst Ford Connect Model Years by Pass Rate

The strongest Ford Connect model year on record is 2007 (68.7% across 217 tests), and the weakest is 2009 (59.8%). The gap between them is 8.9 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.

Ford Connect reliability is declining in the DVSA data — the pass rate moves about 4.5 points a year across the most recent model years shown above.

Newest model year first. Only years with at least 50 recorded tests are listed.

Pre-MOT Inspection Checklist for Ford Connect Owners

These checks follow this Ford Connect's own most-recorded failure strings, starting with what a tester is most likely to flag on a Ford Connect.

• the lights — “registration plate lamp(s) inoperative in the case of multiple lamps or light sources”

  Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.

• the windscreen — “windscreen damaged”

  Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.

• corrosion — “component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength”

  Look under the sills, around the jacking points and where the suspension mounts meet the body. Flaking, holed or crumbly metal fails; a brown stain on sound metal does not.

Derived from the DVSA failure strings testers recorded for the Ford Connect. A check that finds nothing means the item is likely fine, not that the test is guaranteed.

Frequently Asked Questions: Ford Connect MOT & Reliability