Pass rate, every year
303 tests across 2 model years, 2019–2020.
+11.4 pts vs the national average
Pass rate, every year
303 tests across 2 model years, 2019–2020.
+11.4 pts vs the national average
Best year to buy
2019 92.5%
The strongest of the 2 years on record. See the 2019 page →
Worst year to buy
2020 92.3%
0.2 points below the 2019 peak. See the 2020 page →
The Hyundai Tucson Prm SE48V MOT pass rate is 92.4%, +11.4 percentage points above the UK average. That is 303 DVSA MOT tests recorded between 2019 and 2020. This page lists the most common Hyundai Tucson Prm SE48V MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
MOT pass rates are national — type your postcode to see how Hyundai Tucson Prm SE48V MOT pass rates does in your corner of the country.
The Hyundai Tucson Prm SE48V passed on its first attempt in 91.8%, and its overall record sits +11.4 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the Hyundai Tucson Prm SE48V in the 2023–2025 data: 303 tests across 2 model years (2019–2020). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 303 |
| Overall pass rate | 92.4% |
| Passed on first attempt | 91.8% |
| Average mileage at test | 34,257 mi |
| Model years covered | 2019–2020 (2 years) |
| Versus UK national average | +11.4 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the Hyundai Tucson Prm SE48V, the Visibility section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Visibility | 33% |
| Tyres | 27% |
| Steering | 12% |
| Lamps, reflectors and electrical equipment | 9% |
| Noise, emissions and leaks | 6% |
| Suspension | 6% |
| Brakes | 6% |
Shares are over the Hyundai Tucson Prm SE48V's recorded defect strings, merged across its year pages.
Around 33% of the recorded Hyundai Tucson Prm SE48V failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Wipers blade defective" (1.3%), "Wipers does not clear the windscreen effectively" (1.0%), "Washers provides insufficient washer liquid" (0.7%) among the Hyundai Tucson Prm SE48V's visibility faults.
Around 27% of the recorded Hyundai Tucson Prm SE48V failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Tread depth below requirements of 1.6mm" (1.7%), "Has a cut in excess of the requirements deep enough to reach the ply or cords" (1.0%), "Has ply or cords exposed" (0.3%) among the Hyundai Tucson Prm SE48V's tyres faults.
Around 12% of the recorded Hyundai Tucson Prm SE48V failures fall in the Steering section of the MOT inspection manual. Testers recorded "Track rod end ball joint has excessive play" (1.3%) among the Hyundai Tucson Prm SE48V's steering faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the Hyundai Tucson Prm SE48V, each with how many of the model's 303 tests it was noted on.
The strongest Hyundai Tucson Prm SE48V model year on record is 2019 (92.5% across 147 tests), and the weakest is 2020 (92.3%). The gap between them is 0.2 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
| Year | Tests | Pass rate |
|---|---|---|
| 2020 Tucson Prm SE48V | 156 | 92.3% |
| 2019 Tucson Prm SE48V | 147 | 92.5% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this Hyundai Tucson Prm SE48V's own most-recorded failure strings, starting with what a tester is most likely to flag on a Hyundai Tucson Prm SE48V.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
the suspension joints — “track rod end ball joint has excessive play”
With the car parked on level ground, rock the top of each front wheel in and out while someone watches the suspension arm. Clunks, or rubber boots split and greasy, are what testers record here.
the wipers and washers — “wipers blade defective”
Run the wipers with the screen wet: they should clear it in one sweep without smearing or juddering. Top the washer bottle up and check both jets hit the screen.
Derived from the DVSA failure strings testers recorded for the Hyundai Tucson Prm SE48V. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
92.4% of the 303 recorded Hyundai Tucson Prm SE48V MOT tests ended in a pass, +11.4 percentage points above the national average. 91.8% of those passed on the first attempt.
2019 is the strongest Hyundai Tucson Prm SE48V year on record at 92.5%, while 2020 is the weakest at 92.3%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded Hyundai Tucson Prm SE48V failures are "Tread depth below requirements of 1.6mm" and "Track rod end ball joint has excessive play" — together around 3% of tests, mostly in the Tyres section.