Brake hose ferrule corroded on the Vauxhall Meriva

Brake hose ferrule corroded on the Vauxhall Meriva is recorded on 8,583 tests — 2.5% of all its MOT tests, against 1.0% across every car in the data. That is 2.5× the national share.

MOT PASS RATES

Brake hose ferrule corroded on the Vauxhall Meriva

2.5% of tests 2.5× the national share of 1.0% — 8,583 recorded failures

Repair record

This model's record for this item, against every car in the data.

Is this unusual for this model?

Compared withWhat it says
Every car in the data 1.0% of tests record it — this model is 2.5× that share
The 282 models compared 42 of 282, highest first
The model's own record 348,201 tests · every year of the Meriva →

A share of tests is not a probability for your car: it counts every Vauxhall Meriva tested, whatever its mileage, service history and use. The like-for-like comparison on the model page is the fairer number.

Year by year

In 2003, 3.4% of this model's tests recorded it; in 2016, 0.3%. The share has fallen 3.2 points over that time. Worst year 2003 at 3.4%; best 2015 at 0.3%.

YearFailures recordedTestsShare of tests
2003 103 2,998 3.4%
2004 442 14,500 3.0%
2005 512 20,146 2.5%
2006 892 32,110 2.8%
2007 985 57,765 1.7%
2008 998 42,664 2.3%
2009 1,191 63,900 1.9%
2010 1,459 75,856 1.9%
2011 771 109,982 0.7%
2012 370 66,232 0.6%
2013 311 58,874 0.5%
2014 215 55,254 0.4%
2015 157 59,348 0.3%
2016 119 45,950 0.3%

Years with fewer than 0.2% of tests recording the item are left out: a year with two failures in 400 tests is noise, and this table is not here to make noise look like a trend.

What it costs

A typical UK repair for this item is £25–£70 fitted. It is a job a careful owner can do at home. What the part is, and what to buy →

Prices are typical UK supply-and-fitting estimates, not quotes. What happens if it fails covers the retest rules.

Where this sits