Brake hose ferrule corroded on the Vauxhall Vectra

Brake hose ferrule corroded on the Vauxhall Vectra is recorded on 7,037 tests — 6.0% of all its MOT tests, against 1.0% across every car in the data. That is 6.0× the national share.

MOT PASS RATES

Brake hose ferrule corroded on the Vauxhall Vectra

6.0% of tests 6.0× the national share of 1.0% — 7,037 recorded failures

Repair record

This model's record for this item, against every car in the data.

Is this unusual for this model?

Compared withWhat it says
Every car in the data 1.0% of tests record it — this model is 6.0× that share
The 282 models compared 3 of 282, highest first
The model's own record 117,307 tests · every year of the Vectra →

A share of tests is not a probability for your car: it counts every Vauxhall Vectra tested, whatever its mileage, service history and use. The like-for-like comparison on the model page is the fairer number.

Year by year

In 2000, 2.9% of this model's tests recorded it; in 2009, 3.9%. The share has risen 0.9 points over that time. Worst year 2009 at 3.9%; best 2006 at 2.5%.

YearFailures recordedTestsShare of tests
2000 83 2,824 2.9%
2001 130 4,462 2.9%
2002 141 4,428 3.2%
2003 138 5,548 2.5%
2004 301 10,194 3.0%
2005 434 17,082 2.5%
2006 889 36,072 2.5%
2007 1,827 65,500 2.8%
2008 2,584 75,350 3.4%
2009 510 13,154 3.9%

Years with fewer than 0.2% of tests recording the item are left out: a year with two failures in 400 tests is noise, and this table is not here to make noise look like a trend.

What it costs

A typical UK repair for this item is £25–£70 fitted. It is a job a careful owner can do at home. What the part is, and what to buy →

Prices are typical UK supply-and-fitting estimates, not quotes. What happens if it fails covers the retest rules.

Where this sits