Pass rate, every year
49,851 tests across 7 model years, 2014–2020.
+5.7 pts vs the national average
Pass rate, every year
49,851 tests across 7 model years, 2014–2020.
+5.7 pts vs the national average
Best year to buy
2019 91.1%
The strongest of the 7 years on record. See the 2019 page →
Worst year to buy
2014 82.4%
8.7 points below the 2019 peak. See the 2014 page →
The BMW 220 MOT pass rate is 86.7%, +5.7 percentage points above the UK average. That is 49,851 DVSA MOT tests recorded between 2014 and 2020. This page lists the most common BMW 220 MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
MOT pass rates are national — type your postcode to see how BMW 220 MOT pass rates does in your corner of the country.
The BMW 220 passed on its first attempt in 84.8%, and its overall record sits +5.7 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the BMW 220 in the 2023–2025 data: 49,851 tests across 7 model years (2014–2020). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 49,851 |
| Overall pass rate | 86.7% |
| Passed on first attempt | 84.8% |
| Average mileage at test | 55,588 mi |
| Model years covered | 2014–2020 (7 years) |
| Versus UK national average | +5.7 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the BMW 220, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Tyres | 37% |
| Visibility | 28% |
| Suspension | 22% |
| Lamps, reflectors and electrical equipment | 7% |
| Brakes | 5% |
| Road Wheels | 0% |
| Noise, emissions and leaks | 0% |
Shares are over the BMW 220's recorded defect strings, merged across its year pages.
Around 37% of the recorded BMW 220 failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Has a cut in excess of the requirements deep enough to reach the ply or cords" (1.5%), "Tread depth below requirements of 1.6mm" (1.0%), "Has a bulge, caused by separation or partial failure of its structure" (0.9%) among the BMW 220's tyres faults.
Around 28% of the recorded BMW 220 failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Windscreen damaged but not adversely affecting driver's view" (2.3%), "Wipers blade defective" (0.5%), "Washers provides insufficient washer liquid" (0.4%) among the BMW 220's visibility faults.
Around 22% of the recorded BMW 220 failures fall in the Suspension section of the MOT inspection manual. Testers recorded "Shock absorbers has a serious fluid leak" (1.5%), "Coil spring fractured or broken" (0.6%), "Pins and bushes pin or bush excessively worn" (0.4%) among the BMW 220's suspension faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the BMW 220, each with how many of the model's 49,851 tests it was noted on.
The strongest BMW 220 model year on record is 2019 (91.1% across 839 tests), and the weakest is 2014 (82.4%). The gap between them is 8.7 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
BMW 220 reliability is improving in the DVSA data — the pass rate moves about 1.1 points a year across the most recent model years shown above.
| Year | Tests | Pass rate |
|---|---|---|
| 2020 220 | 304 | 91.1% |
| 2019 220 | 839 | 91.1% |
| 2018 220 | 3,949 | 89.6% |
| 2017 220 | 7,968 | 88.4% |
| 2016 220 | 15,159 | 87.1% |
| 2015 220 | 15,749 | 86.0% |
| 2014 220 | 5,883 | 82.4% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this BMW 220's own most-recorded failure strings, starting with what a tester is most likely to flag on a BMW 220.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
the shock absorbers — “shock absorbers has a serious fluid leak”
Press down hard on each corner of the car and let go. It should settle in one bounce; if it keeps rocking, or you can see oil weeping down a shock absorber, that is the fault a tester will find.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
Derived from the DVSA failure strings testers recorded for the BMW 220. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
86.7% of the 49,851 recorded BMW 220 MOT tests ended in a pass, +5.7 percentage points above the national average. 84.8% of those passed on the first attempt.
2019 is the strongest BMW 220 year on record at 91.1%, while 2014 is the weakest at 82.4%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded BMW 220 failures are "Windscreen damaged but not adversely affecting driver's view" and "Has a cut in excess of the requirements deep enough to reach the ply or cords" — together around 4% of tests, mostly in the Visibility section.