Pass rate, every year
11,011 tests across 6 model years, 2018–2023.
+10.2 pts vs the national average
Pass rate, every year
11,011 tests across 6 model years, 2018–2023.
+10.2 pts vs the national average
Best year to buy
2023 95.5%
The strongest of the 6 years on record. See the 2023 page →
Worst year to buy
2018 89.1%
6.4 points below the 2023 peak. See the 2018 page →
The BMW 220I MOT pass rate is 91.2%, +10.2 percentage points above the UK average. That is 11,011 DVSA MOT tests recorded between 2018 and 2023. This page lists the most common BMW 220I MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
The BMW 220I passed on its first attempt in 90.5%, and its overall record sits +10.2 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the BMW 220I in the 2023–2025 data: 11,011 tests across 6 model years (2018–2023). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 11,011 |
| Overall pass rate | 91.2% |
| Passed on first attempt | 90.5% |
| Average mileage at test | 28,947 mi |
| Model years covered | 2018–2023 (6 years) |
| Versus UK national average | +10.2 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the BMW 220I, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Tyres | 49% |
| Lamps, reflectors and electrical equipment | 26% |
| Visibility | 16% |
| Suspension | 5% |
| Brakes | 4% |
| Noise, emissions and leaks | 1% |
| Body, chassis, structure | 0% |
| Road Wheels | 0% |
Shares are over the BMW 220I's recorded defect strings, merged across its year pages.
Around 49% of the recorded BMW 220I failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Has a cut in excess of the requirements deep enough to reach the ply or cords" (2.2%), "Tread depth below requirements of 1.6mm" (0.8%), "Has ply or cords exposed" (0.7%) among the BMW 220I's tyres faults.
Around 26% of the recorded BMW 220I failures fall in the Lamps, reflectors and electrical equipment section of the MOT inspection manual. Testers recorded "Stop lamp not working" (0.7%), "Headlamp aim projected beam image is obviously incorrect" (0.7%), "Headlamp aim too low" (0.4%) among the BMW 220I's lamps, reflectors and electrical equipment faults.
Around 16% of the recorded BMW 220I failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Windscreen damaged but not adversely affecting driver's view" (1.1%), "Wipers blade defective" (0.2%), "Washers provides insufficient washer liquid" (0.1%) among the BMW 220I's visibility faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the BMW 220I, each with how many of the model's 11,011 tests it was noted on.
The strongest BMW 220I model year on record is 2023 (95.5% across 200 tests), and the weakest is 2018 (89.1%). The gap between them is 6.4 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
BMW 220I reliability is improving in the DVSA data — the pass rate moves about 1.2 points a year across the most recent model years shown above.
| Year | Tests | Pass rate |
|---|---|---|
| 2023 220I | 200 | 95.5% |
| 2022 220I | 2,216 | 93.5% |
| 2021 220I | 569 | 92.8% |
| 2020 220I | 1,188 | 91.0% |
| 2019 220I | 5,432 | 90.6% |
| 2018 220I | 1,406 | 89.1% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this BMW 220I's own most-recorded failure strings, starting with what a tester is most likely to flag on a BMW 220I.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
the lights — “stop lamp not working”
Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.
Derived from the DVSA failure strings testers recorded for the BMW 220I. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
Across every 220I model year on record (2018–2023): 6,680 BMW 220I cars tested in a recordable postcode area, across 11,006 tests. Birmingham (B) has the most, with 221 cars tested there. Cars are counted by the postcode area of the MOT station, so this is where they were tested, not necessarily where their owners live.
| # | Postcode area | Cars | Pass rate |
|---|---|---|---|
| 1 | Birmingham (B) | 221 | 90.8% |
| 2 | Glasgow (G) | 138 | 90.7% |
| 3 | Sheffield (S) | 138 | 92.0% |
| 4 | Nottingham (NG) | 129 | 91.2% |
| 5 | Peterborough (PE) | 120 | 89.3% |
| 6 | Reading (RG) | 113 | 88.5% |
| 7 | Edinburgh (EH) | 112 | 91.0% |
| 8 | Manchester (M) | 109 | 87.8% |
| 9 | Bristol (BS) | 105 | 91.5% |
| 10 | Guildford (GU) | 105 | 92.4% |
| 11 | Derby (DE) | 105 | 90.1% |
| 12 | London (NW) | 105 | 94.9% |
| 13 | Warrington (WA) | 103 | 93.5% |
| 14 | Leicester (LE) | 102 | 91.6% |
| 15 | Liverpool (L) | 101 | 88.8% |
| 16 | Kingston upon Thames (KT) | 99 | 90.5% |
| 17 | Preston (PR) | 97 | 87.4% |
| 18 | Newcastle upon Tyne (NE) | 92 | 96.5% |
| 19 | London (SE) | 87 | 89.7% |
| 20 | Blackburn (BB) | 84 | 93.5% |
The twenty areas with the most BMW 220I cars in the record, sorted by car count — sort the columns for a different question. Cars tested at a station whose postcode area could not be resolved are counted in the model's total but in no area, so the shares add up to slightly under 100% even across every area, and an area's cars are a subset of the model's. Pass rate is blank below 30 tests in an area, where a percentage is noise rather than a finding. How this model's pass rate varies by postcode →
91.2% of the 11,011 recorded BMW 220I MOT tests ended in a pass, +10.2 percentage points above the national average. 90.5% of those passed on the first attempt.
2023 is the strongest BMW 220I year on record at 95.5%, while 2018 is the weakest at 89.1%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded BMW 220I failures are "Has a cut in excess of the requirements deep enough to reach the ply or cords" and "Windscreen damaged but not adversely affecting driver's view" — together around 3% of tests, mostly in the Tyres section.