Pass rate, every year
1,996 tests across 7 model years, 2006–2014.
−4.0 pts vs the national average
Pass rate, every year
1,996 tests across 7 model years, 2006–2014.
−4.0 pts vs the national average
Best year to buy
2014 86.8%
The strongest of the 7 years on record. See the 2014 page →
Worst year to buy
2010 74.3%
12.5 points below the 2014 peak. See the 2010 page →
The Chrysler 300 MOT pass rate is 77.0%, −4.0 percentage points below the UK average. That is 1,996 DVSA MOT tests recorded between 2006 and 2014. This page lists the most common Chrysler 300 MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
The Chrysler 300 passed on its first attempt in 72.2%, and its overall record sits −4.0 percentage points below the national average for all cars. These figures come from every recorded DVSA MOT test for the Chrysler 300 in the 2023–2025 data: 1,996 tests across 7 model years (2006–2014). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 1,996 |
| Overall pass rate | 77.0% |
| Passed on first attempt | 72.2% |
| Average mileage at test | 102,756 mi |
| Model years covered | 2006–2014 (7 years) |
| Versus UK national average | −4.0 pts below |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the Chrysler 300, the Brakes section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Brakes | 32% |
| Suspension | 30% |
| Lamps, reflectors and electrical equipment | 17% |
| Steering | 13% |
| Visibility | 7% |
| Body, chassis, structure | 1% |
| Noise, emissions and leaks | 0% |
Shares are over the Chrysler 300's recorded defect strings, merged across its year pages.
Around 32% of the recorded Chrysler 300 failures fall in the Brakes section of the MOT inspection manual. Testers recorded "Rbt (sp) efficiency below requirements" (5.8%), "Parking brake performance inoperative on one side" (3.6%), "Rbt (sp) efficiency less than 50% of the required value" (1.6%) among the Chrysler 300's brakes faults.
Around 30% of the recorded Chrysler 300 failures fall in the Suspension section of the MOT inspection manual. Testers recorded "Ball joint dust cover severely deteriorated" (4.4%), "Pins and bushes pin or bush excessively worn" (3.5%), "Ball joint excessively worn" (2.5%) among the Chrysler 300's suspension faults.
Around 17% of the recorded Chrysler 300 failures fall in the Lamps, reflectors and electrical equipment section of the MOT inspection manual. Testers recorded "Registration plate lamp(s) inoperative in the case of multiple lamps or light sources" (3.8%), "Position lamp not working" (2.6%), "Headlamp lens slightly defective" (0.2%) among the Chrysler 300's lamps, reflectors and electrical equipment faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the Chrysler 300, each with how many of the model's 1,996 tests it was noted on.
The strongest Chrysler 300 model year on record is 2014 (86.8% across 129 tests), and the weakest is 2010 (74.3%). The gap between them is 12.5 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
Chrysler 300 reliability is improving in the DVSA data — the pass rate moves about 1.5 points a year across the most recent model years shown above.
| Year | Tests | Pass rate |
|---|---|---|
| 2014 300 | 129 | 86.8% |
| 2013 300 | 311 | 78.8% |
| 2010 300 | 510 | 74.3% |
| 2009 300 | 294 | 74.8% |
| 2008 300 | 409 | 76.3% |
| 2007 300 | 203 | 77.8% |
| 2006 300 | 140 | 79.3% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this Chrysler 300's own most-recorded failure strings, starting with what a tester is most likely to flag on a Chrysler 300.
the suspension joints — “ball joint dust cover severely deteriorated”
With the car parked on level ground, rock the top of each front wheel in and out while someone watches the suspension arm. Clunks, or rubber boots split and greasy, are what testers record here.
the lights — “registration plate lamp(s) inoperative in the case of multiple lamps or light sources”
Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
Derived from the DVSA failure strings testers recorded for the Chrysler 300. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
77.0% of the 1,996 recorded Chrysler 300 MOT tests ended in a pass, −4.0 percentage points below the national average. 72.2% of those passed on the first attempt.
2014 is the strongest Chrysler 300 year on record at 86.8%, while 2010 is the weakest at 74.3%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded Chrysler 300 failures are "Rbt (sp) efficiency below requirements" and "Ball joint dust cover severely deteriorated" — together around 10% of tests, mostly in the Brakes section.