Calculate my fail sheet

2008 Daihatsu Copen MOT pass rate

Check your postcode

Pass rate by postcode →

Pass rate

82.6%

Around average — 9.5 pts ahead of the 73.1% that cars this age and mileage manage.

Across 922 recorded tests.

Typical repair bill £63–£159

Which year to buy

  • Best 2008 82.6% pass · this year
  • Avoid 2006 71.5% pass

Across the 7 years on record, a spread of 11.1 points. See every year →

First-attempt pass
79.8%
Typical mileage
56k mi

The 2008 Daihatsu Copen MOT pass rate is 82.6% of its MOT tests — 9.5 points ahead of what its age and mileage predict. Brakes is the biggest single reason it fails, at 27.8% of what testers record.

MOT PASS RATES

The 2008 Daihatsu Copen on the real record

82.6% of 2008 Daihatsu Copen MOTs passed — 922 tests, 2023–2025

Pass rate

The answer from the DVSA's class-4 MOT records.

Expert verdict

Brakes: 1.3× the national share

Brakes make up 27.8% of everything recorded on the 2008 Daihatsu Copen, against 20.9% nationally — 6.9 points above. Have the discs and pads measured rather than glanced at, and ask whether the handbrake holds on a slope.

Written from this page's own figures: fault shares against the national composition, the like-for-like pass rate, and the priced repair list. How these are worked out

Watching a Daihatsu Copen? Get an email when these numbers change .

How does the 2008 Daihatsu Copen compare?

Cars of this age and mileage average 73.1%, so this figure is 9.5 points ahead of what its age and mileage predict. On a first attempt, before any retests, the figure drops to 79.8%. The median 2008 Daihatsu Copen in this dataset had covered 56,211 mi.

Pass rates also shift with the test month: tests recorded October–March passed 83.5% of the time, April–September 81.9%.

The single most recorded failure item is "Component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength", noted on 4.01% of tests.

  • 922 recorded tests behind this page.
  • 82.6% overall pass rate, 79.8% on a first attempt.
  • Across every year of the Daihatsu Copen, the average is 77.4% — best year 2008 (82.6%), worst 2006 (71.5%).

Figures count every completed test on this vehicle-year in the dataset, including retests. See methodology for the exact definition.

This page's data

Tests analysed
922
Typical mileage (median)
56,211 mi
Make and model
Daihatsu Copen
Updated
2026-11-07

Source: DVSA anonymised MOT test data (2023–2025), OGL v3.0.

Top part to budget for

Corrosion Welding Repair

Typically a garage job — get quotes before committing.

Does mileage affect the Copen MOT pass rate?

0-30k 89.0%
30-60k 85.2%
60-90k 80.0%
90-120k 73.3%
120k+ 66.7%

Pass rate by odometer reading. Bar lengths start at 58% so small gaps stay visible.

Where the Daihatsu Copen is most common

Across all Copen model years on record (2003–2009): 1,965 Daihatsu Copen cars tested in a recordable postcode area, across 4,548 tests. Birmingham (B) has the most, with 68 cars tested there. Cars are counted by the postcode area of the MOT station, so this is where they were tested, not necessarily where their owners live.

# Postcode area Cars Share of all Tests Pass rate
1 Birmingham (B) 68 3.5% 148 80.4%
2 Norwich (NR) 43 2.2% 118 72.0%
3 Leicester (LE) 41 2.1% 74 90.5%
4 Bristol (BS) 40 2% 105 66.7%
5 Sheffield (S) 38 1.9% 83 79.5%
6 Nottingham (NG) 35 1.8% 94 73.4%
7 Portsmouth (PO) 34 1.7% 95 76.8%
8 Peterborough (PE) 34 1.7% 79 78.5%
9 Ipswich (IP) 33 1.7% 81 80.2%
10 Derby (DE) 33 1.7% 71 80.3%
11 Gloucester (GL) 32 1.6% 78 66.7%
12 Exeter (EX) 31 1.6% 81 75.3%
13 Ashford (TN) 30 1.5% 77 75.3%
14 Coventry (CV) 30 1.5% 76 81.6%
15 Cambridge (CB) 30 1.5% 66 77.3%
16 Milton Keynes (MK) 29 1.5% 56 82.1%
17 Canterbury (CT) 28 1.4% 64 75.0%
18 London (NW) 27 1.4% 61 88.5%
19 Cardiff (CF) 26 1.3% 59 71.2%
20 Chelmsford (CM) 26 1.3% 57 73.7%

The twenty areas with the most Daihatsu Copen cars in the record, sorted by car count — sort the columns for a different question. Cars tested at a station whose postcode area could not be resolved are counted in the model's total but in no area, so the shares add up to slightly under 100% even across every area, and an area's cars are a subset of the model's. Pass rate is blank below 30 tests in an area, where a percentage is noise rather than a finding. How this model's pass rate varies by postcode →

Regional pass rates for the Copen

Region Tests Pass rate
South East 220 81.8%
East of England 112 83.0%
West Midlands 106 85.8%
North West 102 82.4%
Scotland 77 74.0%
South West 73 78.1%
Yorkshire 57 82.5%
East Midlands 54 88.9%
London 45 88.9%
North East 39 79.5%
Wales 37 91.9%

Regions come from the postcode area recorded at the test station. Areas on region borders are assigned to the region with the majority of their population.

What fails a 2008 Copen

Everything a tester recorded on this vehicle, grouped into the inspection sections that produced it. The notch on each bar is the national share, so you can see at a glance whether this car is unusual or just ordinary.

Brakes 27.8%
+6.9 pts vs national national 20.9% Price brakes parts
Suspension 23.4%
+2.4 pts vs national national 21.0% Price suspension parts
Tyres 17.2%
−2.6 pts vs national national 19.8% Compare tyre prices
Body & chassis 10.1%
+4.5 pts vs national national 5.6% Find body panels
Show the other 6 fault categories
  • Lamps & electrics 9.3%
  • Visibility 4.1%
  • Emissions & leaks 2.1%
  • Seat belts 1.8%
  • Advisories 1.4%
  • Identification 1.4%

Shares are of every item recorded on 2008 Daihatsu Copen tests — a composition, so they add to 100% across all sections, not per test.

A test can record several items, so these percentages do not add up to 100%. The exact strings, with prices, are in the full DVSA record at the bottom of this page.

Before your test

Three checks worth doing on a 2008 Copen

These are not generic tips — they are the faults recorded most often on this exact model, rewritten as things you can check yourself. All three take about ten minutes and cost nothing.

  1. Check corrosion 4.0% of tests

    “component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength”

    Look under the sills, around the jacking points and where the suspension mounts meet the body. Flaking, holed or crumbly metal fails; a brown stain on sound metal does not.

  2. Check the suspension joints 3.8% of tests

    “ball joint dust cover severely deteriorated”

    With the car parked on level ground, rock the top of each front wheel in and out while someone watches the suspension arm. Clunks, or rubber boots split and greasy, are what testers record here.

  3. Check the lights 1.7% of tests

    “position lamp not working”

    Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.

Shares are the proportion of tests on this vehicle that recorded the item, so they overlap: one test can record several.

What it costs to get a 2008 Copen through its MOT

Across the 10 items that are recorded most often on this model, the average repair comes to £63–£159 — and 31% of those repairs are parts that cost under £30.

Average repair across the 10 common items
£63–£159
Cheapest common item: stop lamp not working
£3–£12
Dearest common item: component mounting prescribed areas…
£180–£450
Common items a careful owner can do at home
70%
Repairs that still cost under £30
31%

Estimates from typical UK parts prices, weighted by how often each item appears in 922 MOT tests on this vehicle. They exclude diagnostics, retest fees and garage labour where the part is a DIY fit, and they are not figures from the DVSA dataset. Older and higher-mileage examples cost more than the average. How these estimates are built → · All MOT repair costs → · Cheapest cars to put through a test →

Every year of the Copen, side by side

7 model years on record, from 2003 to 2009. Across them the pass rate runs from 71.5% to 82.6% — a spread of 11.1 points. The bar under each year is the item that failed it most often.

  1. 2003 72.5% component mounting prescribed…
  2. 2004 73.9% component mounting prescribed…
  3. 2005 73.7% component mounting prescribed…
  4. 2006 71.5% component mounting prescribed…
  5. 2007 79.3% component mounting prescribed…
  6. 2008 82.6%
    component mounting prescribed…
  7. 2009 82.3% ball joint dust cover severely…

Colour is the pass rate on a fixed scale, so a block means the same thing on any model. Each year links to its own page with the full fault breakdown.

Compare the 2008 Daihatsu Copen with another year

The raw pass rate mostly measures age. The year comparison adds the like-for-like figure, the mileage bands and the repair bill.

Compare 2008 with another year →

Compare two different cars instead →

Other 2008 cars with a similar record

Closest pass rates among 2008 cars with at least 2,000 tests, so a small sample cannot flatter itself into the list. See the full rankings: best and worst MOT pass rates.

The full DVSA record for the 2008 Daihatsu Copen 10 failure items · 6 advisories · 10 inspection categories · mileage brackets · all of it in the page, none of it above the fold

Every inspection category

Shares of the 1,370 individual items recorded on this vehicle, and the same share across all cars nationally. A single test can record several items, so a row is not a percentage of tests.

Category Items This car Nationally Difference
Brakes 386 27.80% 20.89% +6.91
Suspension 325 23.40% 20.98% +2.42
Tyres 239 17.20% 19.76% −2.56
Body, chassis, structure 140 10.10% 5.57% +4.53
Lamps, reflectors and electrical equipment 129 9.30% 12.21% −2.91
Visibility 57 4.10% 4.97% −0.87
Noise, emissions and leaks 29 2.10% 5.52% −3.42
Seat belts and supplementary restraint systems 25 1.80% 0.82% +0.98
Non-component advisories 20 1.40% 4.18% −2.78
Identification of the vehicle 20 1.40% 1.76% −0.36

The exact failure items, in the tester's words

Share of the 922 tests on this vehicle that recorded each item
Recorded item Severity Tests Est. cost Part
Component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength Suspension Major 4.0% £180–450 Corrosion Welding Repair →
Ball joint dust cover severely deteriorated Suspension Minor 3.8% £18–45 Ball Joint →
Position lamp not working Lamps, reflectors and electrical equipment Major 1.7% £5–25 Headlight Bulb →
Headlamp not working on dipped beam Lamps, reflectors and electrical equipment Major 1.4% £5–25 Headlight Bulb →
Windscreen damaged but not adversely affecting driver's view Visibility Minor 1.3% £80–200 Windscreen →
Wipers does not clear the windscreen effectively Visibility Major 1.3% £8–22 Wiper Blade →
Rbt (sp) efficiency below requirements Brakes Major 1.1% £45–110 Brake Discs and Pads Set →
Battery(ies) insecure but not likely to fall from carrier Lamps, reflectors and electrical equipment Minor 0.98% £60–140 Battery →
Rigid brake pipes excessively corroded Brakes Major 0.98% £80–180 Brake Pipe →
Stop lamp not working Lamps, reflectors and electrical equipment Major 0.98% £3–12 Stop Light Bulb →

Severity is as recorded: Major and Dangerous fail the test outright; Minor and Advisory do not. Costs are estimates from typical UK parts prices — see how they are built.

What testers noted without failing the car

Advisories are the early warnings — the same parts a year or two before they fail. Reading them is how you tell a car that has been maintained from one that has been patched.

Items recorded as advisory on this vehicle
Recorded item Severity Tests Est. cost
Has a tear, caused by separation or partial failure of its structure Tyres Advisory 14.9% £45–95
Rigid brake pipes excessively corroded Brakes Advisory 10.9% £80–180
Brake discs in such a condition that it is seriously weakened Brakes Advisory 10.8% £45–110
Flexible brake hoses ferrule excessively corroded Brakes Advisory 7.0% £25–70
Tread depth below requirements of 1.6mm Tyres Advisory 6.3% £45–95
Component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength Suspension Advisory 3.9% £180–450

Pass rate by mileage

Mileage Tests Pass rate Median odometer
0-30k 146 89.0% 21,249 mi
30-60k 372 85.2% 47,377 mi
60-90k 305 80.0% 72,562 mi
90-120k 75 73.3% 100,910 mi
120k+ 24 66.7% 136,114 mi

Source: 922 recorded tests on this vehicle-year. Every row above is recomputed from the same DVSA extract as the rest of the page — see the methodology.

2008 Copen MOT questions

What is the MOT pass rate for a 2008 Daihatsu Copen?

82.6% of the 922 2008 Daihatsu Copen tests in this dataset passed, against a national average of 73.1% for cars first used in 2008. First-attempt pass rate: 79.8%.

What are the most common MOT failures on a 2008 Daihatsu Copen?

The three most recorded items are component mounting prescribed areas prescribed area excessively corroded significantly reducing structural strength (4.01%), ball joint dust cover severely deteriorated (3.80%), position lamp not working (1.74%). Percentages are the share of tests on this vehicle that recorded the item.

Does mileage affect the 2008 Daihatsu Copen MOT pass rate?

Yes. Cars under 30,000 miles passed 89.0% of the time, falling to 66.7% for those over 120,000 miles. The median 2008 Daihatsu Copen in this dataset had covered 56,211 mi.

Does the season affect the 2008 Daihatsu Copen MOT pass rate?

Tests recorded in the winter months (October–March) passed 83.5% of the time; summer months (April–September) passed 81.9%. Brakes, tyres and lights are tested harder in bad weather, but the difference is small on most models.