Pass rate, every year
23,941 tests across 5 model years, 2019–2023.
+10.8 pts vs the national average
Pass rate, every year
23,941 tests across 5 model years, 2019–2023.
+10.8 pts vs the national average
Best year to buy
2023 97.3%
The strongest of the 5 years on record. See the 2023 page →
Worst year to buy
2019 90.9%
6.4 points below the 2023 peak. See the 2019 page →
The BMW M135I MOT pass rate is 91.8%, +10.8 percentage points above the UK average. That is 23,941 DVSA MOT tests recorded between 2019 and 2023. This page lists the most common BMW M135I MOT failures by category, names the best and worst model years, and finishes with a pre-MOT checklist you can run at home.
The BMW M135I passed on its first attempt in 91.2%, and its overall record sits +10.8 percentage points above the national average for all cars. These figures come from every recorded DVSA MOT test for the BMW M135I in the 2023–2025 data: 23,941 tests across 5 model years (2019–2023). A test still carries exactly one pass or fail verdict.
| Measure | This model |
|---|---|
| Tests analysed | 23,941 |
| Overall pass rate | 91.8% |
| Passed on first attempt | 91.2% |
| Average mileage at test | 27,196 mi |
| Model years covered | 2019–2023 (5 years) |
| Versus UK national average | +10.8 pts above |
Figures are computed from every recorded DVSA test for this model in the 2023–2025 data.
Every MOT failure a tester records belongs to one inspection section of the DVSA manual. For the BMW M135I, the Tyres section leads the record — the breakdown below shows where the recorded failures cluster, then the exact strings behind the three biggest sections.
| Inspection section | Share of failures |
|---|---|
| Tyres | 60% |
| Visibility | 23% |
| Brakes | 7% |
| Lamps, reflectors and electrical equipment | 6% |
| Suspension | 4% |
| Identification of the vehicle | 1% |
Shares are over the BMW M135I's recorded defect strings, merged across its year pages.
Around 60% of the recorded BMW M135I failures fall in the Tyres section of the MOT inspection manual. Testers recorded "Has a cut in excess of the requirements deep enough to reach the ply or cords" (2.0%), "Tread depth below requirements of 1.6mm" (1.2%), "Has a bulge, caused by separation or partial failure of its structure" (1.0%) among the BMW M135I's tyres faults.
Around 23% of the recorded BMW M135I failures fall in the Visibility section of the MOT inspection manual. Testers recorded "Windscreen damaged but not adversely affecting driver's view" (1.3%), "Wipers blade defective" (0.6%), "Wipers does not clear the windscreen effectively" (0.1%) among the BMW M135I's visibility faults.
Around 7% of the recorded BMW M135I failures fall in the Brakes section of the MOT inspection manual. Testers recorded "Brake pads less than 1.5 mm thick" (0.4%), "Brake pads worn down to wear indicator" (0.2%) among the BMW M135I's brakes faults.
The descriptions below are the exact DVSA failure strings testers recorded most often for the BMW M135I, each with how many of the model's 23,941 tests it was noted on.
1 failure item is recorded at least 1.5 times the UK rate on this model.
| Failure item | This model | UK | × UK | |
|---|---|---|---|---|
| Tyre cut too deep | 4.7% | 2.5% | 1.9× | £45–£95 |
Rates are a share of this model's own tests (23,941 for the top row), so a big seller cannot outrank a rare one. The UK figure is the same item's share of every test in our data. Items M135I records at or below the UK rate are not listed — this is where it is unusual, not a full inventory. All failure items · parts and costs
The strongest BMW M135I model year on record is 2023 (97.3% across 148 tests), and the weakest is 2019 (90.9%). The gap between them is 6.4 points. Years with fewer than 50 recorded tests are excluded, so these are the years with enough MOT history to mean something.
BMW M135I reliability is improving in the DVSA data — the pass rate moves about 1.4 points a year across the most recent model years shown above.
| Year | Tests | Pass rate |
|---|---|---|
| 2023 M135I | 148 | 97.3% |
| 2022 M135I | 2,389 | 93.0% |
| 2021 M135I | 7,350 | 92.2% |
| 2020 M135I | 11,083 | 91.5% |
| 2019 M135I | 2,971 | 90.9% |
Newest model year first. Only years with at least 50 recorded tests are listed.
These checks follow this BMW M135I's own most-recorded failure strings, starting with what a tester is most likely to flag on a BMW M135I.
the windscreen — “windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
the tyre tread — “tread depth below requirements of 1.6mm”
Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.
the wipers and washers — “wipers blade defective”
Run the wipers with the screen wet: they should clear it in one sweep without smearing or juddering. Top the washer bottle up and check both jets hit the screen.
Derived from the DVSA failure strings testers recorded for the BMW M135I. A check that finds nothing means the item is likely fine, not that the test is guaranteed.
Across every M135I model year on record (2019–2023): 14,745 BMW M135I cars tested in a recordable postcode area, across 23,941 tests. Sheffield (S) has the most, with 426 cars tested there. Cars are counted by the postcode area of the MOT station, so this is where they were tested, not necessarily where their owners live.
| # | Postcode area | Cars | Pass rate |
|---|---|---|---|
| 1 | Sheffield (S) | 426 | 94.0% |
| 2 | Newcastle upon Tyne (NE) | 408 | 95.1% |
| 3 | Birmingham (B) | 378 | 91.5% |
| 4 | Glasgow (G) | 368 | 88.3% |
| 5 | Aberdeen (AB) | 337 | 88.0% |
| 6 | Peterborough (PE) | 327 | 92.9% |
| 7 | Nottingham (NG) | 293 | 91.2% |
| 8 | Reading (RG) | 269 | 90.7% |
| 9 | Derby (DE) | 256 | 93.8% |
| 10 | Edinburgh (EH) | 247 | 91.8% |
| 11 | Leeds (LS) | 245 | 94.3% |
| 12 | Guildford (GU) | 240 | 92.5% |
| 13 | Leicester (LE) | 232 | 93.0% |
| 14 | Warrington (WA) | 227 | 89.6% |
| 15 | Doncaster (DN) | 216 | 94.2% |
| 16 | Manchester (M) | 199 | 93.1% |
| 17 | Coventry (CV) | 193 | 94.1% |
| 18 | Middlesbrough (TS) | 193 | 94.6% |
| 19 | Stockport (SK) | 188 | 88.3% |
| 20 | York (YO) | 183 | 93.6% |
The twenty areas with the most BMW M135I cars in the record, sorted by car count — sort the columns for a different question. Cars tested at a station whose postcode area could not be resolved are counted in the model's total but in no area, so the shares add up to slightly under 100% even across every area, and an area's cars are a subset of the model's. Pass rate is blank below 30 tests in an area, where a percentage is noise rather than a finding. How this model's pass rate varies by postcode →
91.8% of the 23,941 recorded BMW M135I MOT tests ended in a pass, +10.8 percentage points above the national average. 91.2% of those passed on the first attempt.
2023 is the strongest BMW M135I year on record at 97.3%, while 2019 is the weakest at 90.9%. The year-by-year table below lists every model year with at least 50 recorded tests.
The most recorded BMW M135I failures are "Has a cut in excess of the requirements deep enough to reach the ply or cords" and "Windscreen damaged but not adversely affecting driver's view" — together around 3% of tests, mostly in the Tyres section.