Pass rate
78.7%
Around average — 4.0 pts ahead of the 74.7% that cars this age and mileage manage.
Across 7,705 recorded tests.
Typical repair bill £35–£92
2010 BMW 1 Series MOT pass rate
- 2010
- 2 trims combined
- typical 106,426 mi
Most common fault
Suspension
23.6% of faults · 21.0% nationally
mostly worn arm bushes, split ball-joint boots and broken coil springs.
Part only £40–£65 for Shock absorber leaking. What fitting it takes →
7.3 pts down across model years — 7.8% in 2005, 0.5% in 2019.
Which year to buy
- Best 2020 91.2% pass
- Avoid 2004 74.3% pass
Across the 17 years on record, a spread of 16.9 points. See every year →
- First-attempt pass
- 73.6%
- Typical mileage
- 106k mi
The 2010 BMW 1 Series MOT pass rate is 78.7% of its MOT tests — 4.0 points ahead of what its age and mileage predict. Suspension is the biggest single reason it fails, at 23.6% of what testers record.
Check your postcode
MOT pass rates are national — type your postcode to see how BMW 1 Series does in your corner of the country.
Expert verdict
Beats its own age and mileage
Once you allow for how old and how far these cars have been driven, the expected pass rate is 74.7% and this one manages 78.7% — 4.0 points ahead of what its age and mileage predict.
- When it fails, it costs. Only 27% of this model’s typical repairs come in under £30 in parts — the failures here tend to be the kind that need a garage rather than a bulb.
Written from this page's own figures: fault shares against the national composition, the like-for-like pass rate, and the priced repair list. How these are worked out
Watching a BMW 1 Series? Get an email when these numbers change .
Every BMW 1 Series first registered in 2010 is combined here — 2 trim and body variants in total — so the sample is as large as the DVSA data allows.
How does the 2010 BMW 1 Series compare?
Cars of this age and mileage average 74.7%, so this figure is 4.0 points ahead of what its age and mileage predict. On a first attempt, before any retests, the figure drops to 73.6%. The median 2010 BMW 1 Series in this dataset had covered 106,426 mi.
The most common fuel recorded here is Diesel — 68% of tests, with a 77.3% pass rate. Pass rates also shift with the test month: tests recorded October–March passed 78.6% of the time, April–September 78.8%.
The single most recorded failure item is "Shock absorbers has a serious fluid leak", noted on 4.93% of tests.
- 7,705 recorded tests behind this page.
- 78.7% overall pass rate, 73.6% on a first attempt.
- Across every year of the BMW 1 Series, the average is 84.7% — best year 2020 (91.2%), worst 2004 (74.3%).
Figures count every completed test on this vehicle-year in the dataset, including retests. See methodology for the exact definition.
This page's data
- Tests analysed
- 7,705
- Typical mileage (median)
- 106,426 mi
- Make and model
- BMW 1 Series
- Updated
- 2026-11-05
Source: DVSA anonymised MOT test data (2023–2025), OGL v3.0.
Top part to budget for
Shock Absorber
Usually a DIY or independent-garage job.
Does mileage affect the 1 Series MOT pass rate?
Pass rate by odometer reading. Bar lengths start at 68% so small gaps stay visible.
Fuel type and reliability
Pass rate by fuel type. Diesel is the most common here (68% of tests).
Regional pass rates for the 1 Series
| Region | Tests | Pass rate |
|---|---|---|
| South East | 1,722 | 81.0% |
| South West | 1,243 | 74.8% |
| East of England | 1,011 | 80.2% |
| West Midlands | 676 | 80.8% |
| East Midlands | 596 | 78.4% |
| North West | 596 | 80.4% |
| Yorkshire | 584 | 76.9% |
| London | 404 | 86.4% |
| Wales | 398 | 73.6% |
| Scotland | 287 | 69.0% |
| North East | 188 | 77.7% |
Regions come from the postcode area recorded at the test station. Areas on region borders are assigned to the region with the majority of their population.
What fails a 2010 1 Series
Everything a tester recorded on this vehicle, grouped into the inspection sections that produced it. The notch on each bar is the national share, so you can see at a glance whether this car is unusual or just ordinary.
A test can record several items, so these percentages do not add up to 100%. The exact strings, with prices, are in the full DVSA record at the bottom of this page.
Before your test
Three checks worth doing on a 2010 1 Series
These are not generic tips — they are the faults recorded most often on this exact model, rewritten as things you can check yourself. All three take about ten minutes and cost nothing.
-
Check the shock absorbers 4.9% of tests
“shock absorbers has a serious fluid leak”
Press down hard on each corner of the car and let go. It should settle in one bounce; if it keeps rocking, or you can see oil weeping down a shock absorber, that is the fault a tester will find.
-
Check the windscreen 4.4% of tests
“windscreen damaged”
Check the driver’s side of the screen within the swept area for chips and cracks; anything larger than 10mm in the driver’s central view is a fail. Most chips can be resin-repaired for far less than a new screen.
-
Check the lights 3.0% of tests
“registration plate lamp(s) inoperative in the case of multiple lamps or light sources”
Switch everything on and walk round the car: both headlamps on dip and main, every indicator, both brake lights, reverse, fog and the two number-plate lamps. A bulb is a few pounds and a five-minute job.
Shares are the proportion of tests on this vehicle that recorded the item, so they overlap: one test can record several.
What it costs to get a 2010 1 Series through its MOT
Across the 10 items that are recorded most often on this model, the average repair comes to £35–£92 — and 27% of those repairs are parts that cost under £30.
- Average repair across the 10 common items
- £35–£92
- Cheapest common item: malfunction indicator lamp inoperative or…
- £3–£12
- Dearest common item: windscreen damaged
- £80–£200
- Common items a careful owner can do at home
- 70%
- Repairs that still cost under £30
- 27%
Estimates from typical UK parts prices, weighted by how often each item appears in 7,705 MOT tests on this vehicle. They exclude diagnostics, retest fees and garage labour where the part is a DIY fit, and they are not figures from the DVSA dataset. Older and higher-mileage examples cost more than the average. How these estimates are built → · All MOT repair costs → · Cheapest cars to put through a test →
Every year of the 1 Series, side by side
17 model years on record, from 2004 to 2020. Across them the pass rate runs from 74.3% to 91.2% — a spread of 16.9 points. The bar under each year is the item that failed it most often.
- 2004 74.3% windscreen damaged but not…
- 2005 76.1% registration plate lamp(s)…
- 2006 77.3% registration plate lamp(s)…
- 2007 76.9% registration plate lamp(s)…
- 2008 77.9% windscreen damaged but not…
- 2009 77.3% windscreen damaged but not…
- 2010 78.7%shock absorbers has a serious…
- 2011 80.8% shock absorbers has a serious…
- 2012 79.4% windscreen damaged but not…
- 2013 81.2% windscreen damaged but not…
- 2014 87.2% windscreen damaged but not…
- 2015 89.6% windscreen damaged but not…
- 2016 90.3% windscreen damaged but not…
- 2017 89.9% windscreen damaged but not…
- 2018 90.2% windscreen damaged but not…
- 2019 89.8% windscreen damaged but not…
- 2020 91.2% windscreen damaged but not…
Colour is the pass rate on a fixed scale, so a block means the same thing on any model. Each year links to its own page with the full fault breakdown.
Compare the 2010 BMW 1 Series with another year
The raw pass rate mostly measures age. The year comparison adds the like-for-like figure, the mileage bands and the repair bill.
Other 2010 cars with a similar record
- Land Rover Discovery 78.8%
- Volvo XC60 78.6%
- Mercedes-Benz Ml 78.6%
- Mercedes-Benz Slk 78.6%
- Toyota YARIS 78.5%
- Toyota Avensis 78.9%
Closest pass rates among 2010 cars with at least 2,000 tests, so a small sample cannot flatter itself into the list. See the full rankings: best and worst MOT pass rates.
The full DVSA record for the 2010 BMW 1 Series 10 failure items · 6 advisories · 10 inspection categories · mileage brackets · all of it in the page, none of it above the fold
Every inspection category
Shares of the 14,380 individual items recorded on this vehicle, and the same share across all cars nationally. A single test can record several items, so a row is not a percentage of tests.
| Category | Items | This car | Nationally | Difference |
|---|---|---|---|---|
| Suspension | 3,444 | 23.60% | 20.98% | +2.62 |
| Brakes | 3,127 | 21.50% | 20.89% | +0.61 |
| Tyres | 2,987 | 20.50% | 19.76% | +0.74 |
| Lamps, reflectors and electrical equipment | 1,565 | 10.70% | 12.21% | −1.51 |
| Visibility | 991 | 6.80% | 4.97% | +1.83 |
| Noise, emissions and leaks | 794 | 5.40% | 5.52% | −0.12 |
| Body, chassis, structure | 657 | 4.50% | 5.57% | −1.07 |
| Non-component advisories | 384 | 2.60% | 4.18% | −1.58 |
| Identification of the vehicle | 298 | 2.00% | 1.76% | +0.24 |
| Road Wheels | 133 | 0.90% | 0.75% | +0.15 |
The exact failure items, in the tester's words
| Recorded item | Severity | Tests | Est. cost |
|---|---|---|---|
| Shock absorbers has a serious fluid leak Suspension | Major | 4.9% | £30–75 |
| Windscreen damaged but not adversely affecting driver's view Visibility | Minor | 4.4% | £80–200 |
| Registration plate lamp(s) inoperative in the case of multiple lamps or light sources Lamps, reflectors and electrical equipment | Minor | 3.0% | £5–20 |
| Pins and bushes pin or bush excessively worn Suspension | Major | 2.0% | £40–150 |
| Tread depth below requirements of 1.6mm Tyres | Major | 1.9% | £45–95 |
| Washers provides insufficient washer liquid Visibility | Major | 1.6% | £5–15 |
| Malfunction indicator lamp inoperative or indicates a malfunction Noise, emissions and leaks | Major | 1.6% | £3–12 |
| Rbt (sp) efficiency below requirements Brakes | Major | 1.4% | £45–110 |
| Headlamp aim projected beam image is obviously incorrect Lamps, reflectors and electrical equipment | Major | 1.3% | £30–80 |
| Brake pads less than 1.5 mm thick Brakes | Major | 1.2% | £18–45 |
Severity is as recorded: Major and Dangerous fail the test outright; Minor and Advisory do not. Costs are estimates from typical UK parts prices — see how they are built.
What testers noted without failing the car
Advisories are the early warnings — the same parts a year or two before they fail. Reading them is how you tell a car that has been maintained from one that has been patched.
| Recorded item | Severity | Tests | Est. cost |
|---|---|---|---|
| Tread depth below requirements of 1.6mm Tyres | Advisory | 21.7% | £45–95 |
| Pins and bushes pin or bush excessively worn Suspension | Advisory | 11.3% | £40–150 |
| Shock absorbers has a serious fluid leak Suspension | Advisory | 10.8% | £30–75 |
| Brake pads less than 1.5 mm thick Brakes | Advisory | 9.9% | £18–45 |
| Brake discs in such a condition that it is seriously weakened Brakes | Advisory | 9.7% | £45–110 |
| Has a tear, caused by separation or partial failure of its structure Tyres | Advisory | 5.9% | £45–95 |
Pass rate by mileage
| Mileage | Tests | Pass rate | Median odometer |
|---|---|---|---|
| 0-30k | 75 | 92.0% | 22,072 mi |
| 30-60k | 622 | 86.8% | 48,818 mi |
| 60-90k | 1,794 | 80.1% | 76,686 mi |
| 90-120k | 2,429 | 77.8% | 104,798 mi |
| 120k+ | 2,782 | 76.4% | 147,365 mi |
Source: 7,705 recorded tests on this vehicle-year. Every row above is recomputed from the same DVSA extract as the rest of the page — see the methodology.
2010 1 Series MOT questions
What is the MOT pass rate for a 2010 BMW 1 Series?
78.7% of the 7,705 2010 BMW 1 Series tests in this dataset passed, against a national average of 74.7% for cars first used in 2010. First-attempt pass rate: 73.6%.
What are the most common MOT failures on a 2010 BMW 1 Series?
The three most recorded items are shock absorbers has a serious fluid leak (4.93%), windscreen damaged but not adversely affecting driver's view (4.39%), registration plate lamp(s) inoperative in the case of multiple lamps or light sources (3.05%). Percentages are the share of tests on this vehicle that recorded the item.
Does mileage affect the 2010 BMW 1 Series MOT pass rate?
Yes. Cars under 30,000 miles passed 92.0% of the time, falling to 76.4% for those over 120,000 miles. The median 2010 BMW 1 Series in this dataset had covered 106,426 mi.
Which fuel type is most reliable for a 2010 BMW 1 Series?
Diesel: 77.3% pass rate across 5,260 tests. Petrol: 81.7% pass rate across 2,445 tests. Shares are of the tests on this vehicle that recorded each fuel type.
Does the season affect the 2010 BMW 1 Series MOT pass rate?
Tests recorded in the winter months (October–March) passed 78.6% of the time; summer months (April–September) passed 78.8%. Brakes, tyres and lights are tested harder in bad weather, but the difference is small on most models.