2012 Peugeot Ion MOT pass rate

Pass rate

80.0%

Around average — 2.8 pts ahead of the 77.2% that cars this age and mileage manage.

Across 546 recorded tests.

Typical repair bill £29–£67

Which year to buy

  • Best 2016 84.7% pass
  • Avoid 2012 80.0% pass · this year

Across the 6 years on record, a spread of 4.7 points. See every year →

First-attempt pass
76.4%
Typical mileage
43k mi

The 2012 Peugeot Ion MOT pass rate is 80.0% of its MOT tests — 2.8 points ahead of what its age and mileage predict. Suspension is the biggest single reason it fails, at 31.4% of what testers record.

MOT PASS RATES

The 2012 Peugeot Ion on the real record

80.0% of 2012 Peugeot Ion MOTs passed — 546 tests, 2023–2025

Pass rate

The answer from the DVSA's class-4 MOT records.

Check your postcode

MOT pass rates are national — type your postcode to see how Peugeot Ion does in your corner of the country.

How one model's pass rate varies by postcode →

Expert verdict

Suspension: 1.5× the national share

Suspension accounts for 31.4% of everything recorded on the 2012 Peugeot Ion, against 21.0% nationally — 10.4 points above. Ask for the front and rear suspension to be checked on a ramp before you buy — worn bushes and broken springs are cheap to look at and expensive to discover at test time.

Written from this page's own figures: fault shares against the national composition, the like-for-like pass rate, and the priced repair list. How these are worked out

Watching a Peugeot Ion? Get an email when these numbers change .

How does the 2012 Peugeot Ion compare?

Cars of this age and mileage average 77.2%, so this figure is 2.8 points ahead of what its age and mileage predict. On a first attempt, before any retests, the figure drops to 76.4%. The median 2012 Peugeot Ion in this dataset had covered 42,936 mi.

Pass rates also shift with the test month: tests recorded October–March passed 78.1% of the time, April–September 82.2%.

The single most recorded failure item is "Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt", noted on 8.97% of tests.

  • 546 recorded tests behind this page.
  • 80.0% overall pass rate, 76.4% on a first attempt.
  • Across every year of the Peugeot Ion, the average is 81.3% — best year 2016 (84.7%), worst 2012 (80.0%).

Figures count every completed test on this vehicle-year in the dataset, including retests. See methodology for the exact definition.

This page's data

Tests analysed
546
Typical mileage (median)
42,936 mi
Make and model
Peugeot Ion
Updated
2026-11-05

Source: DVSA anonymised MOT test data (2023–2025), OGL v3.0.

Top part to budget for

Ball Joint

Usually a DIY or independent-garage job.

Does mileage affect the Ion MOT pass rate?

0-30k 88.2%
30-60k 80.1%
60-90k 71.4%
90-120k 50.0%

Pass rate by odometer reading. Bar lengths start at 42% so small gaps stay visible.

Regional pass rates for the Ion

Region Tests Pass rate
South West 156 79.5%
South East 98 79.6%
Scotland 79 69.6%
Yorkshire 42 83.3%
London 36 83.3%
West Midlands 34 88.2%
North West 30 86.7%
East of England 26 84.6%
Wales 18 77.8%
North East 16 81.3%

Regions come from the postcode area recorded at the test station. Areas on region borders are assigned to the region with the majority of their population.

What fails a 2012 Ion

Everything a tester recorded on this vehicle, grouped into the inspection sections that produced it. The notch on each bar is the national share, so you can see at a glance whether this car is unusual or just ordinary.

Suspension 31.4%
+10.4 pts vs national national 21.0% Price suspension parts
Brakes 24.4%
+3.5 pts vs national national 20.9% Price brakes parts
Tyres 19.5%
in line with the national share national 19.8% Compare tyre prices
Steering 8.5%
+5.9 pts vs national national 2.6% Price steering parts
Show the other 6 fault categories
  • Body & chassis 4.5%
  • Lamps & electrics 3.3%
  • Visibility 3.1%
  • Advisories 1.7%
  • Seat belts 1.6%
  • Identification 1.1%

Shares are of every item recorded on 2012 Peugeot Ion tests — a composition, so they add to 100% across all sections, not per test.

A test can record several items, so these percentages do not add up to 100%. The exact strings, with prices, are in the full DVSA record at the bottom of this page.

Before your test

Three checks worth doing on a 2012 Ion

These are not generic tips — they are the faults recorded most often on this exact model, rewritten as things you can check yourself. All three take about ten minutes and cost nothing.

  1. Check the suspension joints 9.0% of tests

    “track rod end ball joint dust cover damaged or deteriorated,”

    With the car parked on level ground, rock the top of each front wheel in and out while someone watches the suspension arm. Clunks, or rubber boots split and greasy, are what testers record here.

  2. Check the brake pipes 2.4% of tests

    “rigid brake pipes excessively corroded”

    Brake pipes run under the car, usually in front of the rear wheels. Flaking or crusty metal is what fails; a light dusting of surface rust does not. Worth asking a garage to look while it is on a ramp.

  3. Check the tyre tread 1.5% of tests

    “tread depth below requirements of 1.6mm”

    Check all four tyres cold, including the inner shoulder where wear hides — 1.6mm across the central three-quarters is the legal limit, and most testers fail at 1.6mm without argument.

Shares are the proportion of tests on this vehicle that recorded the item, so they overlap: one test can record several.

What it costs to get a 2012 Ion through its MOT

Across the 10 items that are recorded most often on this model, the average repair comes to £29–£67 — and 0% of those repairs are parts that cost under £30.

Average repair across the 10 common items
£29–£67
Cheapest common item: track rod end ball joint dust cover damaged…
£18–£45
Dearest common item: rigid brake pipes excessively corroded
£80–£180
Common items a careful owner can do at home
90%
Repairs that still cost under £30
0%

Estimates from typical UK parts prices, weighted by how often each item appears in 546 MOT tests on this vehicle. They exclude diagnostics, retest fees and garage labour where the part is a DIY fit, and they are not figures from the DVSA dataset. Older and higher-mileage examples cost more than the average. How these estimates are built → · All MOT repair costs → · Cheapest cars to put through a test →

Every year of the Ion, side by side

6 model years on record, from 2011 to 2016. Across them the pass rate runs from 80.0% to 84.7% — a spread of 4.7 points. The bar under each year is the item that failed it most often.

  1. 2011 82.5% track rod end ball joint dust…
  2. 2012 80.0%
    track rod end ball joint dust…
  3. 2013 81.7% track rod end ball joint dust…
  4. 2014 83.1% ball joint dust cover no longer…
  5. 2015 80.0% track rod end ball joint dust…
  6. 2016 84.7% ball joint dust cover severely…

Colour is the pass rate on a fixed scale, so a block means the same thing on any model. Each year links to its own page with the full fault breakdown.

Compare the 2012 Peugeot Ion with another year

The raw pass rate mostly measures age. The year comparison adds the like-for-like figure, the mileage bands and the repair bill.

Compare 2012 with another year →

Compare two different cars instead →

Other 2012 cars with a similar record

Closest pass rates among 2012 cars with at least 2,000 tests, so a small sample cannot flatter itself into the list. See the full rankings: best and worst MOT pass rates.

The full DVSA record for the 2012 Peugeot Ion 10 failure items · 6 advisories · 10 inspection categories · mileage brackets · all of it in the page, none of it above the fold

Every inspection category

Shares of the 985 individual items recorded on this vehicle, and the same share across all cars nationally. A single test can record several items, so a row is not a percentage of tests.

Category Items This car Nationally Difference
Suspension 312 31.40% 20.98% +10.42
Brakes 242 24.40% 20.89% +3.51
Tyres 194 19.50% 19.76% −0.26
Steering 84 8.50% 2.57% +5.93
Body, chassis, structure 45 4.50% 5.57% −1.07
Lamps, reflectors and electrical equipment 33 3.30% 12.21% −8.91
Visibility 31 3.10% 4.97% −1.87
Non-component advisories 17 1.70% 4.18% −2.48
Seat belts and supplementary restraint systems 16 1.60% 0.82% +0.78
Identification of the vehicle 11 1.10% 1.76% −0.66

The exact failure items, in the tester's words

Share of the 546 tests on this vehicle that recorded each item
Recorded item Severity Tests Est. cost Part
Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Steering Minor 9.0% £18–45 Ball Joint →
Ball joint dust cover severely deteriorated Suspension Minor 6.6% £18–45 Ball Joint →
Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of… Steering Major 2.6% £18–45 Ball Joint →
Rigid brake pipes excessively corroded Brakes Major 2.4% £80–180 Brake Pipe →
Obviously under inflated Tyres Minor 2.0% £45–95 Tyres →
Service brake imbalance across an axle Brakes Major 1.8% £45–110 Brake Discs and Pads Set →
Ball joint dust cover no longer prevents the ingress of dirt Suspension Major 1.6% £18–45 Ball Joint →
Track rod end ball joint has excessive play Steering Major 1.5% £18–45 Ball Joint →
Tread depth below requirements of 1.6mm Tyres Major 1.5% £45–95 Tyres →
Has a cut in excess of the requirements deep enough to reach the ply or cords Tyres Major 1.3% £45–95 Tyres →

Severity is as recorded: Major and Dangerous fail the test outright; Minor and Advisory do not. Costs are estimates from typical UK parts prices — see how they are built.

What testers noted without failing the car

Advisories are the early warnings — the same parts a year or two before they fail. Reading them is how you tell a car that has been maintained from one that has been patched.

Items recorded as advisory on this vehicle
Recorded item Severity Tests Est. cost
Pins and bushes pin or bush excessively worn Suspension Advisory 14.8% £40–150
Has a tear, caused by separation or partial failure of its structure Tyres Advisory 12.8% £45–95
Rigid brake pipes excessively corroded Brakes Advisory 12.1% £80–180
Tread depth below requirements of 1.6mm Tyres Advisory 11.4% £45–95
Brake discs in such a condition that it is seriously weakened Brakes Advisory 9.9% £45–110
Sub-frame corroded and seriously weakened Suspension Advisory 8.4% £180–450

Pass rate by mileage

Mileage Tests Pass rate Median odometer
0-30k 127 88.2% 21,387 mi
30-60k 311 80.1% 44,254 mi
60-90k 105 71.4% 70,099 mi
90-120k 2 50.0% 100,926 mi

Source: 546 recorded tests on this vehicle-year. Every row above is recomputed from the same DVSA extract as the rest of the page — see the methodology.

2012 Ion MOT questions

What is the MOT pass rate for a 2012 Peugeot Ion?

80.0% of the 546 2012 Peugeot Ion tests in this dataset passed, against a national average of 77.2% for cars first used in 2012. First-attempt pass rate: 76.4%.

What are the most common MOT failures on a 2012 Peugeot Ion?

The three most recorded items are track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (8.97%), ball joint dust cover severely deteriorated (6.59%), track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of… (2.56%). Percentages are the share of tests on this vehicle that recorded the item.

Does mileage affect the 2012 Peugeot Ion MOT pass rate?

Yes. Cars under 30,000 miles passed 88.2% of the time, falling to 50.0% for those over 120,000 miles. The median 2012 Peugeot Ion in this dataset had covered 42,936 mi.

Does the season affect the 2012 Peugeot Ion MOT pass rate?

Tests recorded in the winter months (October–March) passed 78.1% of the time; summer months (April–September) passed 82.2%. Brakes, tyres and lights are tested harder in bad weather, but the difference is small on most models.